Guide d'implémentation Fr Core
2.1.0 - trial-use France flag

This page is part of the Guide d'implémentation Fr Core (v2.1.0: Release) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions

Resource Profile: FRCoreOrganizationProfile - Detailed Descriptions

Active as of 2024-09-04

Definitions for the fr-core-organization resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Organization
2. Organization.meta
4. Organization.meta.profile
SlicingThis element introduces a set of slices on Organization.meta.profile. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ $this
  • 6. Organization.meta.profile:fr-canonical
    Slice Namefr-canonical
    Control0..1
    Pattern Valuehttps://hl7.fr/ig/fhir/core/StructureDefinition/fr-core-organization
    8. Organization.extension:shortName
    Slice NameshortName
    Control0..1
    TypeExtension(FR Core Organization Short Name Extension) (Extension Type: string)
    10. Organization.extension:description
    Slice Namedescription
    Control0..1
    TypeExtension(FR Core Organization Description Extension) (Extension Type: string)
    12. Organization.extension:usePeriod
    Slice NameusePeriod
    Control0..1
    TypeExtension(Organization Period) (Extension Type: Period)
    14. Organization.identifier
    NoteThis is a business identifier, not a resource identifier (see discussion)
    SlicingThis element introduces a set of slices on Organization.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • pattern @ system
    • pattern @ type
    • 16. Organization.identifier.use
      BindingThe codes SHALL be taken from IdentifierUse
      (required to http://hl7.org/fhir/ValueSet/identifier-use)
      18. Organization.identifier.type
      BindingUnless not suitable, these codes SHALL be taken from FR Core ValueSet Organization identifier type
      (extensible to https://hl7.fr/ig/fhir/core/ValueSet/fr-core-vs-organization-identifier-type)
      20. Organization.identifier.system
      Control1..?
      22. Organization.identifier.value
      Control1..?
      24. Organization.identifier:idNatSt
      Slice NameidNatSt
      ShortIdentifiant idNat_Struct délivré par une autorité d'enregistrement tel que défini dans l'Annexe Transverse Source des données métier pour les professionnels et les structures.
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..1
      26. Organization.identifier:idNatSt.use
      Pattern Valueofficial
      28. Organization.identifier:idNatSt.type
      Control1..?
      Pattern Value{
        "coding" : [{
          "system" : "https://hl7.fr/ig/fhir/core/CodeSystem/fr-core-cs-v2-0203",
          "code" : "IDNST"
        }]
      }
      30. Organization.identifier:idNatSt.system
      Pattern Valueurn:oid:1.2.250.1.71.4.2.2
      32. Organization.identifier:idNatSt.value
      ShortIdentification nationale de la structure préfixé : 0 + ADELI rang, 1 + Numéro FINESS Etablissement, 2 + Numéro SIREN, 3 + Numéro SIRET, 4 + RPPS rang ou identifiant technique de la structure.
      34. Organization.identifier:siren
      Slice Namesiren
      ShortIdentifiant SIREN (9 chiffres)
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..*
      36. Organization.identifier:siren.type
      Control1..?
      Pattern Value{
        "coding" : [{
          "system" : "https://hl7.fr/ig/fhir/core/CodeSystem/fr-core-cs-v2-0203",
          "code" : "SIREN"
        }]
      }
      38. Organization.identifier:siren.system
      Pattern Valuehttps://sirene.fr
      40. Organization.identifier:siret
      Slice Namesiret
      ShortIdentifiant SIRET (14 chiffres)
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..*
      42. Organization.identifier:siret.type
      Control1..?
      Pattern Value{
        "coding" : [{
          "system" : "https://hl7.fr/ig/fhir/core/CodeSystem/fr-core-cs-v2-0203",
          "code" : "SIRET"
        }]
      }
      44. Organization.identifier:siret.system
      Pattern Valuehttps://sirene.fr
      46. Organization.identifier:finess
      Slice Namefiness
      ShortIdentifiant FINESS Entité Géographique (EG) ou Entité Juridique (EJ)
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..*
      48. Organization.identifier:finess.type
      50. Organization.identifier:finess.type.coding
      52. Organization.identifier:finess.type.coding.system
      Pattern Valuehttps://hl7.fr/ig/fhir/core/CodeSystem/fr-core-cs-v2-0203
      54. Organization.identifier:finess.type.coding.code
      ShortFINEJ | FINEG
      56. Organization.identifier:finess.system
      Pattern Valuehttps://finess.esante.gouv.fr
      58. Organization.identifier:adeliRang
      Slice NameadeliRang
      ShortIdentifiant ADELI rang (9 chiffres ADELI + 2 chiffres RANG)
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..*
      60. Organization.identifier:adeliRang.type
      Control1..?
      Pattern Value{
        "coding" : [{
          "system" : "https://hl7.fr/ig/fhir/core/CodeSystem/fr-core-cs-v2-0203",
          "code" : "INTRN"
        }]
      }
      62. Organization.identifier:adeliRang.system
      Pattern Valuehttps://adelirang.esante.gouv.fr
      64. Organization.identifier:rppsRang
      Slice NamerppsRang
      ShortRPPS rang (11 chiffres RPPS + 2 chiffres RANG)
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..*
      66. Organization.identifier:rppsRang.type
      Control1..?
      Pattern Value{
        "coding" : [{
          "system" : "https://hl7.fr/ig/fhir/core/CodeSystem/fr-core-cs-v2-0203",
          "code" : "INTRN"
        }]
      }
      68. Organization.identifier:rppsRang.system
      Pattern Valuehttps://rppsrang.esante.gouv.fr
      70. Organization.type
      SlicingThis element introduces a set of slices on Organization.type. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • pattern @ $this
      • 72. Organization.type:organizationType
        Slice NameorganizationType
        Control0..1
        BindingThe codes SHALL be taken from FR Core ValueSet Organization type
        (required to https://hl7.fr/ig/fhir/core/ValueSet/fr-core-vs-organization-type)
        74. Organization.type:organizationType.coding
        Control1..1
        76. Organization.type:organizationType.coding.system
        Control1..?
        78. Organization.type:secteurActiviteRASS
        Slice NamesecteurActiviteRASS
        ShortSecteurs d'activité des établissements avec la même activité dans le RASS
        Control0..1
        BindingThe codes SHALL be taken from JDV_J101-SecteurActivite-RASS
        (required to https://mos.esante.gouv.fr/NOS/JDV_J101-SecteurActivite-RASS/FHIR/JDV-J101-SecteurActivite-RASS)
        80. Organization.type:secteurActiviteRASS.coding
        Control1..1
        82. Organization.type:secteurActiviteRASS.coding.system
        Control1..?
        84. Organization.type:categorieEtablissementRASS
        Slice NamecategorieEtablissementRASS
        ShortCatégorie d'établissement du RASS
        Control0..1
        BindingThe codes SHALL be taken from JDV_J129-CategorieEtablissement-RASS
        (required to https://mos.esante.gouv.fr/NOS/JDV_J129-CategorieEtablissement-RASS/FHIR/JDV-J129-CategorieEtablissement-RASS)
        86. Organization.type:categorieEtablissementRASS.coding
        Control1..1
        88. Organization.type:categorieEtablissementRASS.coding.system
        Control1..?
        90. Organization.telecom
        TypeContactPoint(FR Core Contact Point Profile)
        92. Organization.address
        TypeAddress(FR Core Address Profile)
        94. Organization.partOf
        TypeReference(FR Core Organization Profile)
        96. Organization.partOf.type
        BindingUnless not suitable, these codes SHALL be taken from FR Core ValueSet Organization type
        (extensible to https://hl7.fr/ig/fhir/core/ValueSet/fr-core-vs-organization-type)
        98. Organization.contact
        100. Organization.contact.telecom
        TypeContactPoint(FR Core Contact Point Profile)
        102. Organization.contact.address
        TypeAddress(FR Core Address Profile)

        Guidance on how to interpret the contents of this table can be found here

        0. Organization
        Definition

        A formally or informally recognized grouping of people or organizations formed for the purpose of achieving some form of collective action. Includes companies, institutions, corporations, departments, community groups, healthcare practice groups, payer/insurer, etc.

        ShortA grouping of people or organizations with a common purpose
        Control0..*
        Is Modifierfalse
        Summaryfalse
        Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
        dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
        dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
        dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
        dom-6: A resource should have narrative for robust management (text.`div`.exists())
        org-1: The organization SHALL at least have a name or an identifier, and possibly more than one ((identifier.count() + name.count()) > 0)
        org-1: The organization SHALL at least have a name or an identifier, and possibly more than one ((identifier.count() + name.count()) > 0)
        2. Organization.implicitRules
        Definition

        A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

        ShortA set of rules under which this content was created
        Comments

        Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

        Control0..1
        Typeuri
        Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        4. Organization.extension:shortName
        Slice NameshortName
        Definition

        An Extension

        ShortFR Core Organization Short Name Extension
        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(FR Core Organization Short Name Extension) (Extension Type: string)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        6. Organization.extension:description
        Slice Namedescription
        Definition

        An Extension

        ShortFR Core Organization Description Extension
        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(FR Core Organization Description Extension) (Extension Type: string)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        8. Organization.extension:usePeriod
        Slice NameusePeriod
        Definition

        The date range that this organization should be considered available.

        ShortExtension
        Control0..1
        TypeExtension(Organization Period) (Extension Type: Period)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        10. Organization.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
        Summaryfalse
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        12. Organization.identifier
        Definition

        Identifier for the organization that is used to identify the organization across multiple disparate systems.

        ShortIdentifies this organization across multiple systems
        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control0..*
        This element is affected by the following invariants: org-1
        TypeIdentifier
        Is Modifierfalse
        Summarytrue
        Requirements

        Organizations are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the organization.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        SlicingThis element introduces a set of slices on Organization.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • pattern @ system
        • pattern @ type
        • 14. Organization.identifier.use
          Definition

          The purpose of this identifier.

          Shortusual | official | temp | secondary | old (If known)
          Comments

          Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

          Control0..1
          BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
          (required to http://hl7.org/fhir/ValueSet/identifier-use)
          Typecode
          Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          16. Organization.identifier.type
          Definition

          A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

          ShortDescription of identifier
          Comments

          This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

          Control0..1
          BindingUnless not suitable, these codes SHALL be taken from FR Core ValueSet Organization identifier typehttp://hl7.org/fhir/ValueSet/identifier-type
          (extensible to https://hl7.fr/ig/fhir/core/ValueSet/fr-core-vs-organization-identifier-type)
          TypeCodeableConcept
          Is Modifierfalse
          Summarytrue
          Requirements

          Allows users to make use of identifiers when the identifier system is not known.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          18. Organization.identifier.system
          Definition

          Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

          ShortThe namespace for the identifier value
          Comments

          Identifier.system is always case sensitive.

          Control10..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

          Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          20. Organization.identifier.value
          Definition

          The portion of the identifier typically relevant to the user and which is unique within the context of the system.

          ShortThe value that is unique
          Comments

          If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

          Control10..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Example<br/><b>General</b>:123456
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          22. Organization.identifier:idNatSt
          Slice NameidNatSt
          Definition

          Identifier for the organization that is used to identify the organization across multiple disparate systems.

          ShortIdentifiant idNat_Struct délivré par une autorité d'enregistrement tel que défini dans l'Annexe Transverse Source des données métier pour les professionnels et les structures.Identifies this organization across multiple systems
          NoteThis is a business identifier, not a resource identifier (see discussion)
          Control0..1*
          This element is affected by the following invariants: org-1
          TypeIdentifier
          Is Modifierfalse
          Summarytrue
          Requirements

          Organizations are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the organization.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          24. Organization.identifier:idNatSt.use
          Definition

          The purpose of this identifier.

          Shortusual | official | temp | secondary | old (If known)
          Comments

          Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

          Control0..1
          BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
          (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

          Identifies the purpose for this identifier, if known .

          Typecode
          Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

          Pattern Valueofficial
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          26. Organization.identifier:idNatSt.type
          Definition

          A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

          ShortDescription of identifier
          Comments

          This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

          Control10..1
          BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codeshttp://hl7.org/fhir/ValueSet/identifier-type
          (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

          A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

          TypeCodeableConcept
          Is Modifierfalse
          Summarytrue
          Requirements

          Allows users to make use of identifiers when the identifier system is not known.

          Pattern Value{
            "coding" : [{
              "system" : "https://hl7.fr/ig/fhir/core/CodeSystem/fr-core-cs-v2-0203",
              "code" : "IDNST"
            }]
          }
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          28. Organization.identifier:idNatSt.system
          Definition

          Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

          ShortThe namespace for the identifier value
          Comments

          Identifier.system is always case sensitive.

          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

          Pattern Valueurn:oid:1.2.250.1.71.4.2.2
          Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          30. Organization.identifier:idNatSt.value
          Definition

          The portion of the identifier typically relevant to the user and which is unique within the context of the system.

          ShortIdentification nationale de la structure préfixé : 0 + ADELI rang, 1 + Numéro FINESS Etablissement, 2 + Numéro SIREN, 3 + Numéro SIRET, 4 + RPPS rang ou identifiant technique de la structure.The value that is unique
          Comments

          If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Example<br/><b>General</b>:123456
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          32. Organization.identifier:siren
          Slice Namesiren
          Definition

          Identifier for the organization that is used to identify the organization across multiple disparate systems.

          ShortIdentifiant SIREN (9 chiffres)Identifies this organization across multiple systems
          NoteThis is a business identifier, not a resource identifier (see discussion)
          Control0..*
          This element is affected by the following invariants: org-1
          TypeIdentifier
          Is Modifierfalse
          Summarytrue
          Requirements

          Organizations are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the organization.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          34. Organization.identifier:siren.use
          Definition

          The purpose of this identifier.

          Shortusual | official | temp | secondary | old (If known)
          Comments

          Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

          Control0..1
          BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
          (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

          Identifies the purpose for this identifier, if known .

          Typecode
          Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          36. Organization.identifier:siren.type
          Definition

          A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

          ShortDescription of identifier
          Comments

          This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

          Control10..1
          BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codeshttp://hl7.org/fhir/ValueSet/identifier-type
          (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

          A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

          TypeCodeableConcept
          Is Modifierfalse
          Summarytrue
          Requirements

          Allows users to make use of identifiers when the identifier system is not known.

          Pattern Value{
            "coding" : [{
              "system" : "https://hl7.fr/ig/fhir/core/CodeSystem/fr-core-cs-v2-0203",
              "code" : "SIREN"
            }]
          }
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          38. Organization.identifier:siren.system
          Definition

          Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

          ShortThe namespace for the identifier value
          Comments

          Identifier.system is always case sensitive.

          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

          Pattern Valuehttps://sirene.fr
          Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          40. Organization.identifier:siret
          Slice Namesiret
          Definition

          Identifier for the organization that is used to identify the organization across multiple disparate systems.

          ShortIdentifiant SIRET (14 chiffres)Identifies this organization across multiple systems
          NoteThis is a business identifier, not a resource identifier (see discussion)
          Control0..*
          This element is affected by the following invariants: org-1
          TypeIdentifier
          Is Modifierfalse
          Summarytrue
          Requirements

          Organizations are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the organization.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          42. Organization.identifier:siret.use
          Definition

          The purpose of this identifier.

          Shortusual | official | temp | secondary | old (If known)
          Comments

          Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

          Control0..1
          BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
          (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

          Identifies the purpose for this identifier, if known .

          Typecode
          Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          44. Organization.identifier:siret.type
          Definition

          A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

          ShortDescription of identifier
          Comments

          This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

          Control10..1
          BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codeshttp://hl7.org/fhir/ValueSet/identifier-type
          (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

          A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

          TypeCodeableConcept
          Is Modifierfalse
          Summarytrue
          Requirements

          Allows users to make use of identifiers when the identifier system is not known.

          Pattern Value{
            "coding" : [{
              "system" : "https://hl7.fr/ig/fhir/core/CodeSystem/fr-core-cs-v2-0203",
              "code" : "SIRET"
            }]
          }
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          46. Organization.identifier:siret.system
          Definition

          Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

          ShortThe namespace for the identifier value
          Comments

          Identifier.system is always case sensitive.

          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

          Pattern Valuehttps://sirene.fr
          Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          48. Organization.identifier:finess
          Slice Namefiness
          Definition

          Identifier for the organization that is used to identify the organization across multiple disparate systems.

          ShortIdentifiant FINESS Entité Géographique (EG) ou Entité Juridique (EJ)Identifies this organization across multiple systems
          NoteThis is a business identifier, not a resource identifier (see discussion)
          Control0..*
          This element is affected by the following invariants: org-1
          TypeIdentifier
          Is Modifierfalse
          Summarytrue
          Requirements

          Organizations are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the organization.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          50. Organization.identifier:finess.use
          Definition

          The purpose of this identifier.

          Shortusual | official | temp | secondary | old (If known)
          Comments

          Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

          Control0..1
          BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
          (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

          Identifies the purpose for this identifier, if known .

          Typecode
          Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          52. Organization.identifier:finess.system
          Definition

          Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

          ShortThe namespace for the identifier value
          Comments

          Identifier.system is always case sensitive.

          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

          Pattern Valuehttps://finess.esante.gouv.fr
          Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          54. Organization.identifier:adeliRang
          Slice NameadeliRang
          Definition

          Identifier for the organization that is used to identify the organization across multiple disparate systems.

          ShortIdentifiant ADELI rang (9 chiffres ADELI + 2 chiffres RANG)Identifies this organization across multiple systems
          NoteThis is a business identifier, not a resource identifier (see discussion)
          Control0..*
          This element is affected by the following invariants: org-1
          TypeIdentifier
          Is Modifierfalse
          Summarytrue
          Requirements

          Organizations are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the organization.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          56. Organization.identifier:adeliRang.use
          Definition

          The purpose of this identifier.

          Shortusual | official | temp | secondary | old (If known)
          Comments

          Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

          Control0..1
          BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
          (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

          Identifies the purpose for this identifier, if known .

          Typecode
          Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          58. Organization.identifier:adeliRang.type
          Definition

          A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

          ShortDescription of identifier
          Comments

          This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

          Control10..1
          BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codeshttp://hl7.org/fhir/ValueSet/identifier-type
          (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

          A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

          TypeCodeableConcept
          Is Modifierfalse
          Summarytrue
          Requirements

          Allows users to make use of identifiers when the identifier system is not known.

          Pattern Value{
            "coding" : [{
              "system" : "https://hl7.fr/ig/fhir/core/CodeSystem/fr-core-cs-v2-0203",
              "code" : "INTRN"
            }]
          }
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          60. Organization.identifier:adeliRang.system
          Definition

          Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

          ShortThe namespace for the identifier value
          Comments

          Identifier.system is always case sensitive.

          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

          Pattern Valuehttps://adelirang.esante.gouv.fr
          Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          62. Organization.identifier:rppsRang
          Slice NamerppsRang
          Definition

          Identifier for the organization that is used to identify the organization across multiple disparate systems.

          ShortRPPS rang (11 chiffres RPPS + 2 chiffres RANG)Identifies this organization across multiple systems
          NoteThis is a business identifier, not a resource identifier (see discussion)
          Control0..*
          This element is affected by the following invariants: org-1
          TypeIdentifier
          Is Modifierfalse
          Summarytrue
          Requirements

          Organizations are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the organization.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          64. Organization.identifier:rppsRang.use
          Definition

          The purpose of this identifier.

          Shortusual | official | temp | secondary | old (If known)
          Comments

          Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

          Control0..1
          BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
          (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

          Identifies the purpose for this identifier, if known .

          Typecode
          Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          66. Organization.identifier:rppsRang.type
          Definition

          A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

          ShortDescription of identifier
          Comments

          This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

          Control10..1
          BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codeshttp://hl7.org/fhir/ValueSet/identifier-type
          (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

          A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

          TypeCodeableConcept
          Is Modifierfalse
          Summarytrue
          Requirements

          Allows users to make use of identifiers when the identifier system is not known.

          Pattern Value{
            "coding" : [{
              "system" : "https://hl7.fr/ig/fhir/core/CodeSystem/fr-core-cs-v2-0203",
              "code" : "INTRN"
            }]
          }
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          68. Organization.identifier:rppsRang.system
          Definition

          Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

          ShortThe namespace for the identifier value
          Comments

          Identifier.system is always case sensitive.

          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

          Pattern Valuehttps://rppsrang.esante.gouv.fr
          Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          70. Organization.active
          Definition

          Whether the organization's record is still in active use.

          ShortWhether the organization's record is still in active use
          Comments

          This active flag is not intended to be used to mark an organization as temporarily closed or under construction. Instead the Location(s) within the Organization should have the suspended status. If further details of the reason for the suspension are required, then an extension on this element should be used.

          This element is labeled as a modifier because it may be used to mark that the resource was created in error.

          Control0..1
          Typeboolean
          Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          Need a flag to indicate a record is no longer to be used and should generally be hidden for the user in the UI.

          Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          72. Organization.type
          Definition

          The kind(s) of organization that this is.

          ShortKind of organization
          Comments

          Organizations can be corporations, wards, sections, clinical teams, government departments, etc. Note that code is generally a classifier of the type of organization; in many applications, codes are used to identity a particular organization (say, ward) as opposed to another of the same type - these are identifiers, not codes

          When considering if multiple types are appropriate, you should evaluate if child organizations would be a more appropriate use of the concept, as different types likely are in different sub-areas of the organization. This is most likely to be used where type values have orthogonal values, such as a religious, academic and medical center.

          We expect that some jurisdictions will profile this optionality to be a single cardinality.

          Control0..*
          BindingFor example codes, see OrganizationTypehttp://hl7.org/fhir/ValueSet/organization-type
          (example to http://hl7.org/fhir/ValueSet/organization-type)

          Used to categorize the organization.

          TypeCodeableConcept
          Is Modifierfalse
          Summarytrue
          Requirements

          Need to be able to track the kind of organization that this is - different organization types have different uses.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          SlicingThis element introduces a set of slices on Organization.type. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • pattern @ $this
          • 74. Organization.type:organizationType
            Slice NameorganizationType
            Definition

            The kind(s) of organization that this is.

            ShortKind of organization
            Comments

            Organizations can be corporations, wards, sections, clinical teams, government departments, etc. Note that code is generally a classifier of the type of organization; in many applications, codes are used to identity a particular organization (say, ward) as opposed to another of the same type - these are identifiers, not codes

            When considering if multiple types are appropriate, you should evaluate if child organizations would be a more appropriate use of the concept, as different types likely are in different sub-areas of the organization. This is most likely to be used where type values have orthogonal values, such as a religious, academic and medical center.

            We expect that some jurisdictions will profile this optionality to be a single cardinality.

            Control0..1*
            BindingThe codes SHALL be taken from For example codes, see FR Core ValueSet Organization typehttp://hl7.org/fhir/ValueSet/organization-type
            (required to https://hl7.fr/ig/fhir/core/ValueSet/fr-core-vs-organization-type)
            TypeCodeableConcept
            Is Modifierfalse
            Summarytrue
            Requirements

            Need to be able to track the kind of organization that this is - different organization types have different uses.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            76. Organization.type:organizationType.coding
            Definition

            A reference to a code defined by a terminology system.

            ShortCode defined by a terminology system
            Comments

            Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

            Control10..1*
            TypeCoding
            Is Modifierfalse
            Summarytrue
            Requirements

            Allows for alternative encodings within a code system, and translations to other code systems.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            78. Organization.type:organizationType.coding.system
            Definition

            The identification of the code system that defines the meaning of the symbol in the code.

            ShortIdentity of the terminology system
            Comments

            The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

            Control10..1
            Typeuri
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            Need to be unambiguous about the source of the definition of the symbol.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            80. Organization.type:secteurActiviteRASS
            Slice NamesecteurActiviteRASS
            Definition

            The kind(s) of organization that this is.

            ShortSecteurs d'activité des établissements avec la même activité dans le RASSKind of organization
            Comments

            Organizations can be corporations, wards, sections, clinical teams, government departments, etc. Note that code is generally a classifier of the type of organization; in many applications, codes are used to identity a particular organization (say, ward) as opposed to another of the same type - these are identifiers, not codes

            When considering if multiple types are appropriate, you should evaluate if child organizations would be a more appropriate use of the concept, as different types likely are in different sub-areas of the organization. This is most likely to be used where type values have orthogonal values, such as a religious, academic and medical center.

            We expect that some jurisdictions will profile this optionality to be a single cardinality.

            Control0..1*
            BindingThe codes SHALL be taken from For example codes, see JDV_J101-SecteurActivite-RASShttp://hl7.org/fhir/ValueSet/organization-type
            (required to https://mos.esante.gouv.fr/NOS/JDV_J101-SecteurActivite-RASS/FHIR/JDV-J101-SecteurActivite-RASS)
            TypeCodeableConcept
            Is Modifierfalse
            Summarytrue
            Requirements

            Need to be able to track the kind of organization that this is - different organization types have different uses.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            82. Organization.type:secteurActiviteRASS.coding
            Definition

            A reference to a code defined by a terminology system.

            ShortCode defined by a terminology system
            Comments

            Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

            Control10..1*
            TypeCoding
            Is Modifierfalse
            Summarytrue
            Requirements

            Allows for alternative encodings within a code system, and translations to other code systems.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            84. Organization.type:secteurActiviteRASS.coding.system
            Definition

            The identification of the code system that defines the meaning of the symbol in the code.

            ShortIdentity of the terminology system
            Comments

            The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

            Control10..1
            Typeuri
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            Need to be unambiguous about the source of the definition of the symbol.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            86. Organization.type:categorieEtablissementRASS
            Slice NamecategorieEtablissementRASS
            Definition

            The kind(s) of organization that this is.

            ShortCatégorie d'établissement du RASSKind of organization
            Comments

            Organizations can be corporations, wards, sections, clinical teams, government departments, etc. Note that code is generally a classifier of the type of organization; in many applications, codes are used to identity a particular organization (say, ward) as opposed to another of the same type - these are identifiers, not codes

            When considering if multiple types are appropriate, you should evaluate if child organizations would be a more appropriate use of the concept, as different types likely are in different sub-areas of the organization. This is most likely to be used where type values have orthogonal values, such as a religious, academic and medical center.

            We expect that some jurisdictions will profile this optionality to be a single cardinality.

            Control0..1*
            BindingThe codes SHALL be taken from For example codes, see JDV_J129-CategorieEtablissement-RASShttp://hl7.org/fhir/ValueSet/organization-type
            (required to https://mos.esante.gouv.fr/NOS/JDV_J129-CategorieEtablissement-RASS/FHIR/JDV-J129-CategorieEtablissement-RASS)
            TypeCodeableConcept
            Is Modifierfalse
            Summarytrue
            Requirements

            Need to be able to track the kind of organization that this is - different organization types have different uses.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            88. Organization.type:categorieEtablissementRASS.coding
            Definition

            A reference to a code defined by a terminology system.

            ShortCode defined by a terminology system
            Comments

            Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

            Control10..1*
            TypeCoding
            Is Modifierfalse
            Summarytrue
            Requirements

            Allows for alternative encodings within a code system, and translations to other code systems.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            90. Organization.type:categorieEtablissementRASS.coding.system
            Definition

            The identification of the code system that defines the meaning of the symbol in the code.

            ShortIdentity of the terminology system
            Comments

            The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

            Control10..1
            Typeuri
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            Need to be unambiguous about the source of the definition of the symbol.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            92. Organization.telecom
            Definition

            Details for all kinds of technology mediated contact points for a person or organization, including telephone, email, etc.


            A contact detail for the organization.

            ShortDetails of a Technology mediated contact point (phone, fax, email, etc.)A contact detail for the organization
            Comments

            The use code 'home' is not to be used. Note that these contacts are not the contact details of people who are employed by or represent the organization, but official contacts for the organization itself.

            Control0..*
            This element is affected by the following invariants: ele-1, org-3
            TypeContactPoint(FR Core Contact Point Profile)
            Is Modifierfalse
            Requirements

            Human contact for the organization.

            Invariantscpt-2: A system is required if a value is provided. (value.empty() or system.exists())
            ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            org-3: The telecom of an organization can never be of use 'home' (where(use = 'home').empty())
            94. Organization.address
            Definition

            An address expressed using postal conventions (as opposed to GPS or other location definition formats). This data type may be used to convey addresses for use in delivering mail as well as for visiting locations which might not be valid for mail delivery. There are a variety of postal address formats defined around the world.


            An address for the organization.

            ShortAn address expressed using postal conventions (as opposed to GPS or other location definition formats)An address for the organization
            Comments

            Note: address is intended to describe postal addresses for administrative purposes, not to describe absolute geographical coordinates. Postal addresses are often used as proxies for physical locations (also see the Location resource).


            Organization may have multiple addresses with different uses or applicable periods. The use code 'home' is not to be used.

            Control0..*
            This element is affected by the following invariants: ele-1, org-2
            TypeAddress(FR Core Address Profile)
            Is Modifierfalse
            Requirements

            May need to keep track of the organization's addresses for contacting, billing or reporting requirements.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            org-2: An address of an organization can never be of use 'home' (where(use = 'home').empty())
            96. Organization.partOf
            Definition

            The organization of which this organization forms a part.

            ShortThe organization of which this organization forms a part
            Control0..1
            TypeReference(FR Core Organization Profile, Organization)
            Is Modifierfalse
            Summarytrue
            Requirements

            Need to be able to track the hierarchy of organizations within an organization.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            98. Organization.partOf.type
            Definition

            The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

            The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

            ShortType the reference refers to (e.g. "Patient")
            Comments

            This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

            Control0..1
            BindingUnless not suitable, these codes SHALL be taken from FR Core ValueSet Organization typehttp://hl7.org/fhir/ValueSet/resource-types
            (extensible to https://hl7.fr/ig/fhir/core/ValueSet/fr-core-vs-organization-type)
            Typeuri
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

            Guidance on how to interpret the contents of this table can be found here

            0. Organization
            Definition

            A formally or informally recognized grouping of people or organizations formed for the purpose of achieving some form of collective action. Includes companies, institutions, corporations, departments, community groups, healthcare practice groups, payer/insurer, etc.

            ShortA grouping of people or organizations with a common purpose
            Control0..*
            Is Modifierfalse
            Summaryfalse
            Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
            dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
            dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
            dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
            dom-6: A resource should have narrative for robust management (text.`div`.exists())
            org-1: The organization SHALL at least have a name or an identifier, and possibly more than one ((identifier.count() + name.count()) > 0)
            2. Organization.id
            Definition

            The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

            ShortLogical id of this artifact
            Comments

            The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

            Control0..1
            Typeid
            Is Modifierfalse
            Summarytrue
            4. Organization.meta
            Definition

            The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

            ShortMetadata about the resource
            Control0..1
            TypeMeta
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            6. Organization.meta.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            8. Organization.meta.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingThis element introduces a set of slices on Organization.meta.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 10. Organization.meta.versionId
              Definition

              The version specific identifier, as it appears in the version portion of the URL. This value changes when the resource is created, updated, or deleted.

              ShortVersion specific identifier
              Comments

              The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes.

              Control0..1
              Typeid
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              12. Organization.meta.lastUpdated
              Definition

              When the resource last changed - e.g. when the version changed.

              ShortWhen the resource version last changed
              Comments

              This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a read interaction.

              Control0..1
              Typeinstant
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              14. Organization.meta.source
              Definition

              A uri that identifies the source system of the resource. This provides a minimal amount of Provenance information that can be used to track or differentiate the source of information in the resource. The source may identify another FHIR server, document, message, database, etc.

              ShortIdentifies where the resource comes from
              Comments

              In the provenance resource, this corresponds to Provenance.entity.what[x]. The exact use of the source (and the implied Provenance.entity.role) is left to implementer discretion. Only one nominated source is allowed; for additional provenance details, a full Provenance resource should be used.

              This element can be used to indicate where the current master source of a resource that has a canonical URL if the resource is no longer hosted at the canonical URL.

              Control0..1
              Typeuri
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              16. Organization.meta.profile
              Definition

              A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url.

              ShortProfiles this resource claims to conform to
              Comments

              It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set.

              Control0..*
              Typecanonical(StructureDefinition)
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              SlicingThis element introduces a set of slices on Organization.meta.profile. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ $this
              • 18. Organization.meta.profile:fr-canonical
                Slice Namefr-canonical
                Definition

                A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url.

                ShortProfiles this resource claims to conform to
                Comments

                It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set.

                Control0..1
                Typecanonical(StructureDefinition)
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Pattern Valuehttps://hl7.fr/ig/fhir/core/StructureDefinition/fr-core-organization
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                20. Organization.meta.security
                Definition

                Security labels applied to this resource. These tags connect specific resources to the overall security policy and infrastructure.

                ShortSecurity Labels applied to this resource
                Comments

                The security labels can be updated without changing the stated version of the resource. The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored.

                Control0..*
                BindingUnless not suitable, these codes SHALL be taken from All Security Labels
                (extensible to http://hl7.org/fhir/ValueSet/security-labels)

                Security Labels from the Healthcare Privacy and Security Classification System.

                TypeCoding
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                22. Organization.meta.tag
                Definition

                Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource.

                ShortTags applied to this resource
                Comments

                The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.

                Control0..*
                BindingFor example codes, see CommonTags
                (example to http://hl7.org/fhir/ValueSet/common-tags)

                Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones".

                TypeCoding
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                24. Organization.implicitRules
                Definition

                A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

                ShortA set of rules under which this content was created
                Comments

                Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

                Control0..1
                Typeuri
                Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                26. Organization.language
                Definition

                The base language in which the resource is written.

                ShortLanguage of the resource content
                Comments

                Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

                Control0..1
                BindingThe codes SHOULD be taken from CommonLanguages
                (preferred to http://hl7.org/fhir/ValueSet/languages)

                A human language.

                Additional BindingsPurpose
                AllLanguagesMax Binding
                Typecode
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                28. Organization.text
                Definition

                A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

                ShortText summary of the resource, for human interpretation
                Comments

                Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

                Control0..1
                TypeNarrative
                Is Modifierfalse
                Summaryfalse
                Alternate Namesnarrative, html, xhtml, display
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                30. Organization.contained
                Definition

                These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

                ShortContained, inline Resources
                Comments

                This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

                Control0..*
                TypeResource
                Is Modifierfalse
                Summaryfalse
                Alternate Namesinline resources, anonymous resources, contained resources
                32. Organization.extension
                Definition

                An Extension

                ShortExtension
                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                SlicingThis element introduces a set of slices on Organization.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ url
                • 34. Organization.extension:shortName
                  Slice NameshortName
                  Definition

                  An Extension

                  ShortFR Core Organization Short Name Extension
                  Control0..1
                  This element is affected by the following invariants: ele-1
                  TypeExtension(FR Core Organization Short Name Extension) (Extension Type: string)
                  Is Modifierfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  36. Organization.extension:description
                  Slice Namedescription
                  Definition

                  An Extension

                  ShortFR Core Organization Description Extension
                  Control0..1
                  This element is affected by the following invariants: ele-1
                  TypeExtension(FR Core Organization Description Extension) (Extension Type: string)
                  Is Modifierfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  38. Organization.extension:usePeriod
                  Slice NameusePeriod
                  Definition

                  The date range that this organization should be considered available.

                  ShortExtension
                  Control0..1
                  TypeExtension(Organization Period) (Extension Type: Period)
                  Is Modifierfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  40. Organization.modifierExtension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                  ShortExtensions that cannot be ignored
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
                  Summaryfalse
                  Requirements

                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  42. Organization.identifier
                  Definition

                  Identifier for the organization that is used to identify the organization across multiple disparate systems.

                  ShortIdentifies this organization across multiple systems
                  NoteThis is a business identifier, not a resource identifier (see discussion)
                  Control0..*
                  This element is affected by the following invariants: org-1
                  TypeIdentifier
                  Is Modifierfalse
                  Summarytrue
                  Requirements

                  Organizations are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the organization.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  SlicingThis element introduces a set of slices on Organization.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • pattern @ system
                  • pattern @ type
                  • 44. Organization.identifier.id
                    Definition

                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    ShortUnique id for inter-element referencing
                    Control0..1
                    Typestring
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    46. Organization.identifier.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    SlicingThis element introduces a set of slices on Organization.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                    • value @ url
                    • 48. Organization.identifier.use
                      Definition

                      The purpose of this identifier.

                      Shortusual | official | temp | secondary | old (If known)
                      Comments

                      Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

                      Control0..1
                      BindingThe codes SHALL be taken from IdentifierUse
                      (required to http://hl7.org/fhir/ValueSet/identifier-use)
                      Typecode
                      Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Requirements

                      Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      50. Organization.identifier.type
                      Definition

                      A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

                      ShortDescription of identifier
                      Comments

                      This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

                      Control0..1
                      BindingUnless not suitable, these codes SHALL be taken from FR Core ValueSet Organization identifier type
                      (extensible to https://hl7.fr/ig/fhir/core/ValueSet/fr-core-vs-organization-identifier-type)
                      TypeCodeableConcept
                      Is Modifierfalse
                      Summarytrue
                      Requirements

                      Allows users to make use of identifiers when the identifier system is not known.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      52. Organization.identifier.system
                      Definition

                      Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

                      ShortThe namespace for the identifier value
                      Comments

                      Identifier.system is always case sensitive.

                      Control1..1
                      Typeuri
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Requirements

                      There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

                      Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      54. Organization.identifier.value
                      Definition

                      The portion of the identifier typically relevant to the user and which is unique within the context of the system.

                      ShortThe value that is unique
                      Comments

                      If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

                      Control1..1
                      Typestring
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Example<br/><b>General</b>:123456
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      56. Organization.identifier.period
                      Definition

                      Time period during which identifier is/was valid for use.

                      ShortTime period when id is/was valid for use
                      Control0..1
                      TypePeriod
                      Is Modifierfalse
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      58. Organization.identifier.assigner
                      Definition

                      Organization that issued/manages the identifier.

                      ShortOrganization that issued id (may be just text)
                      Comments

                      The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

                      Control0..1
                      TypeReference(Organization)
                      Is Modifierfalse
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      60. Organization.identifier:idNatSt
                      Slice NameidNatSt
                      Definition

                      Identifier for the organization that is used to identify the organization across multiple disparate systems.

                      ShortIdentifiant idNat_Struct délivré par une autorité d'enregistrement tel que défini dans l'Annexe Transverse Source des données métier pour les professionnels et les structures.
                      NoteThis is a business identifier, not a resource identifier (see discussion)
                      Control0..1
                      This element is affected by the following invariants: org-1
                      TypeIdentifier
                      Is Modifierfalse
                      Summarytrue
                      Requirements

                      Organizations are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the organization.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      62. Organization.identifier:idNatSt.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      64. Organization.identifier:idNatSt.extension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                      ShortAdditional content defined by implementations
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesextensions, user content
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      SlicingThis element introduces a set of slices on Organization.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                      • value @ url
                      • 66. Organization.identifier:idNatSt.use
                        Definition

                        The purpose of this identifier.

                        Shortusual | official | temp | secondary | old (If known)
                        Comments

                        Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

                        Control0..1
                        BindingThe codes SHALL be taken from IdentifierUse
                        (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

                        Identifies the purpose for this identifier, if known .

                        Typecode
                        Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Requirements

                        Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

                        Pattern Valueofficial
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        68. Organization.identifier:idNatSt.type
                        Definition

                        A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

                        ShortDescription of identifier
                        Comments

                        This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

                        Control1..1
                        BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
                        (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

                        A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

                        TypeCodeableConcept
                        Is Modifierfalse
                        Summarytrue
                        Requirements

                        Allows users to make use of identifiers when the identifier system is not known.

                        Pattern Value{
                          "coding" : [{
                            "system" : "https://hl7.fr/ig/fhir/core/CodeSystem/fr-core-cs-v2-0203",
                            "code" : "IDNST"
                          }]
                        }
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        70. Organization.identifier:idNatSt.system
                        Definition

                        Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

                        ShortThe namespace for the identifier value
                        Comments

                        Identifier.system is always case sensitive.

                        Control0..1
                        Typeuri
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Requirements

                        There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

                        Pattern Valueurn:oid:1.2.250.1.71.4.2.2
                        Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        72. Organization.identifier:idNatSt.value
                        Definition

                        The portion of the identifier typically relevant to the user and which is unique within the context of the system.

                        ShortIdentification nationale de la structure préfixé : 0 + ADELI rang, 1 + Numéro FINESS Etablissement, 2 + Numéro SIREN, 3 + Numéro SIRET, 4 + RPPS rang ou identifiant technique de la structure.
                        Comments

                        If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

                        Control0..1
                        Typestring
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Example<br/><b>General</b>:123456
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        74. Organization.identifier:idNatSt.period
                        Definition

                        Time period during which identifier is/was valid for use.

                        ShortTime period when id is/was valid for use
                        Control0..1
                        TypePeriod
                        Is Modifierfalse
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        76. Organization.identifier:idNatSt.assigner
                        Definition

                        Organization that issued/manages the identifier.

                        ShortOrganization that issued id (may be just text)
                        Comments

                        The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

                        Control0..1
                        TypeReference(Organization)
                        Is Modifierfalse
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        78. Organization.identifier:siren
                        Slice Namesiren
                        Definition

                        Identifier for the organization that is used to identify the organization across multiple disparate systems.

                        ShortIdentifiant SIREN (9 chiffres)
                        NoteThis is a business identifier, not a resource identifier (see discussion)
                        Control0..*
                        This element is affected by the following invariants: org-1
                        TypeIdentifier
                        Is Modifierfalse
                        Summarytrue
                        Requirements

                        Organizations are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the organization.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        80. Organization.identifier:siren.id
                        Definition

                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        ShortUnique id for inter-element referencing
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        82. Organization.identifier:siren.extension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                        ShortAdditional content defined by implementations
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifierfalse
                        Summaryfalse
                        Alternate Namesextensions, user content
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        SlicingThis element introduces a set of slices on Organization.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                        • value @ url
                        • 84. Organization.identifier:siren.use
                          Definition

                          The purpose of this identifier.

                          Shortusual | official | temp | secondary | old (If known)
                          Comments

                          Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

                          Control0..1
                          BindingThe codes SHALL be taken from IdentifierUse
                          (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

                          Identifies the purpose for this identifier, if known .

                          Typecode
                          Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summarytrue
                          Requirements

                          Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          86. Organization.identifier:siren.type
                          Definition

                          A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

                          ShortDescription of identifier
                          Comments

                          This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

                          Control1..1
                          BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
                          (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

                          A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

                          TypeCodeableConcept
                          Is Modifierfalse
                          Summarytrue
                          Requirements

                          Allows users to make use of identifiers when the identifier system is not known.

                          Pattern Value{
                            "coding" : [{
                              "system" : "https://hl7.fr/ig/fhir/core/CodeSystem/fr-core-cs-v2-0203",
                              "code" : "SIREN"
                            }]
                          }
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          88. Organization.identifier:siren.system
                          Definition

                          Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

                          ShortThe namespace for the identifier value
                          Comments

                          Identifier.system is always case sensitive.

                          Control0..1
                          Typeuri
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summarytrue
                          Requirements

                          There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

                          Pattern Valuehttps://sirene.fr
                          Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          90. Organization.identifier:siren.value
                          Definition

                          The portion of the identifier typically relevant to the user and which is unique within the context of the system.

                          ShortThe value that is unique
                          Comments

                          If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

                          Control0..1
                          Typestring
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summarytrue
                          Example<br/><b>General</b>:123456
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          92. Organization.identifier:siren.period
                          Definition

                          Time period during which identifier is/was valid for use.

                          ShortTime period when id is/was valid for use
                          Control0..1
                          TypePeriod
                          Is Modifierfalse
                          Summarytrue
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          94. Organization.identifier:siren.assigner
                          Definition

                          Organization that issued/manages the identifier.

                          ShortOrganization that issued id (may be just text)
                          Comments

                          The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

                          Control0..1
                          TypeReference(Organization)
                          Is Modifierfalse
                          Summarytrue
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          96. Organization.identifier:siret
                          Slice Namesiret
                          Definition

                          Identifier for the organization that is used to identify the organization across multiple disparate systems.

                          ShortIdentifiant SIRET (14 chiffres)
                          NoteThis is a business identifier, not a resource identifier (see discussion)
                          Control0..*
                          This element is affected by the following invariants: org-1
                          TypeIdentifier
                          Is Modifierfalse
                          Summarytrue
                          Requirements

                          Organizations are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the organization.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          98. Organization.identifier:siret.id
                          Definition

                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                          ShortUnique id for inter-element referencing
                          Control0..1
                          Typestring
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          100. Organization.identifier:siret.extension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                          ShortAdditional content defined by implementations
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifierfalse
                          Summaryfalse
                          Alternate Namesextensions, user content
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          SlicingThis element introduces a set of slices on Organization.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                          • value @ url
                          • 102. Organization.identifier:siret.use
                            Definition

                            The purpose of this identifier.

                            Shortusual | official | temp | secondary | old (If known)
                            Comments

                            Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

                            Control0..1
                            BindingThe codes SHALL be taken from IdentifierUse
                            (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

                            Identifies the purpose for this identifier, if known .

                            Typecode
                            Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            Requirements

                            Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            104. Organization.identifier:siret.type
                            Definition

                            A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

                            ShortDescription of identifier
                            Comments

                            This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

                            Control1..1
                            BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
                            (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

                            A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

                            TypeCodeableConcept
                            Is Modifierfalse
                            Summarytrue
                            Requirements

                            Allows users to make use of identifiers when the identifier system is not known.

                            Pattern Value{
                              "coding" : [{
                                "system" : "https://hl7.fr/ig/fhir/core/CodeSystem/fr-core-cs-v2-0203",
                                "code" : "SIRET"
                              }]
                            }
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            106. Organization.identifier:siret.system
                            Definition

                            Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

                            ShortThe namespace for the identifier value
                            Comments

                            Identifier.system is always case sensitive.

                            Control0..1
                            Typeuri
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            Requirements

                            There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

                            Pattern Valuehttps://sirene.fr
                            Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            108. Organization.identifier:siret.value
                            Definition

                            The portion of the identifier typically relevant to the user and which is unique within the context of the system.

                            ShortThe value that is unique
                            Comments

                            If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

                            Control0..1
                            Typestring
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            Example<br/><b>General</b>:123456
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            110. Organization.identifier:siret.period
                            Definition

                            Time period during which identifier is/was valid for use.

                            ShortTime period when id is/was valid for use
                            Control0..1
                            TypePeriod
                            Is Modifierfalse
                            Summarytrue
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            112. Organization.identifier:siret.assigner
                            Definition

                            Organization that issued/manages the identifier.

                            ShortOrganization that issued id (may be just text)
                            Comments

                            The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

                            Control0..1
                            TypeReference(Organization)
                            Is Modifierfalse
                            Summarytrue
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            114. Organization.identifier:finess
                            Slice Namefiness
                            Definition

                            Identifier for the organization that is used to identify the organization across multiple disparate systems.

                            ShortIdentifiant FINESS Entité Géographique (EG) ou Entité Juridique (EJ)
                            NoteThis is a business identifier, not a resource identifier (see discussion)
                            Control0..*
                            This element is affected by the following invariants: org-1
                            TypeIdentifier
                            Is Modifierfalse
                            Summarytrue
                            Requirements

                            Organizations are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the organization.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            116. Organization.identifier:finess.id
                            Definition

                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                            ShortUnique id for inter-element referencing
                            Control0..1
                            Typestring
                            Is Modifierfalse
                            XML FormatIn the XML format, this property is represented as an attribute.
                            Summaryfalse
                            118. Organization.identifier:finess.extension
                            Definition

                            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                            ShortAdditional content defined by implementations
                            Comments

                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                            Control0..*
                            TypeExtension
                            Is Modifierfalse
                            Summaryfalse
                            Alternate Namesextensions, user content
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            SlicingThis element introduces a set of slices on Organization.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                            • value @ url
                            • 120. Organization.identifier:finess.use
                              Definition

                              The purpose of this identifier.

                              Shortusual | official | temp | secondary | old (If known)
                              Comments

                              Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

                              Control0..1
                              BindingThe codes SHALL be taken from IdentifierUse
                              (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

                              Identifies the purpose for this identifier, if known .

                              Typecode
                              Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              122. Organization.identifier:finess.type
                              Definition

                              A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

                              ShortDescription of identifier
                              Comments

                              This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

                              Control0..1
                              BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
                              (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

                              A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

                              TypeCodeableConcept
                              Is Modifierfalse
                              Summarytrue
                              Requirements

                              Allows users to make use of identifiers when the identifier system is not known.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              124. Organization.identifier:finess.type.id
                              Definition

                              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                              ShortUnique id for inter-element referencing
                              Control0..1
                              Typestring
                              Is Modifierfalse
                              XML FormatIn the XML format, this property is represented as an attribute.
                              Summaryfalse
                              126. Organization.identifier:finess.type.extension
                              Definition

                              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                              ShortAdditional content defined by implementations
                              Comments

                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                              Control0..*
                              TypeExtension
                              Is Modifierfalse
                              Summaryfalse
                              Alternate Namesextensions, user content
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              SlicingThis element introduces a set of slices on Organization.identifier.type.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                              • value @ url
                              • 128. Organization.identifier:finess.type.coding
                                Definition

                                A reference to a code defined by a terminology system.

                                ShortCode defined by a terminology system
                                Comments

                                Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                                Control0..*
                                TypeCoding
                                Is Modifierfalse
                                Summarytrue
                                Requirements

                                Allows for alternative encodings within a code system, and translations to other code systems.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                130. Organization.identifier:finess.type.coding.id
                                Definition

                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                ShortUnique id for inter-element referencing
                                Control0..1
                                Typestring
                                Is Modifierfalse
                                XML FormatIn the XML format, this property is represented as an attribute.
                                Summaryfalse
                                132. Organization.identifier:finess.type.coding.extension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                ShortAdditional content defined by implementations
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifierfalse
                                Summaryfalse
                                Alternate Namesextensions, user content
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                SlicingThis element introduces a set of slices on Organization.identifier.type.coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                • value @ url
                                • 134. Organization.identifier:finess.type.coding.system
                                  Definition

                                  The identification of the code system that defines the meaning of the symbol in the code.

                                  ShortIdentity of the terminology system
                                  Comments

                                  The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

                                  Control0..1
                                  Typeuri
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Summarytrue
                                  Requirements

                                  Need to be unambiguous about the source of the definition of the symbol.

                                  Pattern Valuehttps://hl7.fr/ig/fhir/core/CodeSystem/fr-core-cs-v2-0203
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  136. Organization.identifier:finess.type.coding.version
                                  Definition

                                  The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

                                  ShortVersion of the system - if relevant
                                  Comments

                                  Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

                                  NoteThis is a business version Id, not a resource version Id (see discussion)
                                  Control0..1
                                  Typestring
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  138. Organization.identifier:finess.type.coding.code
                                  Definition

                                  A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

                                  ShortFINEJ | FINEG
                                  Control0..1
                                  Typecode
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Summarytrue
                                  Requirements

                                  Need to refer to a particular code in the system.

                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  140. Organization.identifier:finess.type.coding.display
                                  Definition

                                  A representation of the meaning of the code in the system, following the rules of the system.

                                  ShortRepresentation defined by the system
                                  Control0..1
                                  Typestring
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Summarytrue
                                  Requirements

                                  Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  142. Organization.identifier:finess.type.coding.userSelected
                                  Definition

                                  Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

                                  ShortIf this coding was chosen directly by the user
                                  Comments

                                  Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

                                  Control0..1
                                  Typeboolean
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Summarytrue
                                  Requirements

                                  This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  144. Organization.identifier:finess.type.text
                                  Definition

                                  A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                                  ShortPlain text representation of the concept
                                  Comments

                                  Very often the text is the same as a displayName of one of the codings.

                                  Control0..1
                                  Typestring
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Summarytrue
                                  Requirements

                                  The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  146. Organization.identifier:finess.system
                                  Definition

                                  Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

                                  ShortThe namespace for the identifier value
                                  Comments

                                  Identifier.system is always case sensitive.

                                  Control0..1
                                  Typeuri
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Summarytrue
                                  Requirements

                                  There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

                                  Pattern Valuehttps://finess.esante.gouv.fr
                                  Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  148. Organization.identifier:finess.value
                                  Definition

                                  The portion of the identifier typically relevant to the user and which is unique within the context of the system.

                                  ShortThe value that is unique
                                  Comments

                                  If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

                                  Control0..1
                                  Typestring
                                  Is Modifierfalse
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Summarytrue
                                  Example<br/><b>General</b>:123456
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  150. Organization.identifier:finess.period
                                  Definition

                                  Time period during which identifier is/was valid for use.

                                  ShortTime period when id is/was valid for use
                                  Control0..1
                                  TypePeriod
                                  Is Modifierfalse
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  152. Organization.identifier:finess.assigner
                                  Definition

                                  Organization that issued/manages the identifier.

                                  ShortOrganization that issued id (may be just text)
                                  Comments

                                  The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

                                  Control0..1
                                  TypeReference(Organization)
                                  Is Modifierfalse
                                  Summarytrue
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  154. Organization.identifier:adeliRang
                                  Slice NameadeliRang
                                  Definition

                                  Identifier for the organization that is used to identify the organization across multiple disparate systems.

                                  ShortIdentifiant ADELI rang (9 chiffres ADELI + 2 chiffres RANG)
                                  NoteThis is a business identifier, not a resource identifier (see discussion)
                                  Control0..*
                                  This element is affected by the following invariants: org-1
                                  TypeIdentifier
                                  Is Modifierfalse
                                  Summarytrue
                                  Requirements

                                  Organizations are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the organization.

                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  156. Organization.identifier:adeliRang.id
                                  Definition

                                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                  ShortUnique id for inter-element referencing
                                  Control0..1
                                  Typestring
                                  Is Modifierfalse
                                  XML FormatIn the XML format, this property is represented as an attribute.
                                  Summaryfalse
                                  158. Organization.identifier:adeliRang.extension
                                  Definition

                                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                  ShortAdditional content defined by implementations
                                  Comments

                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                  Control0..*
                                  TypeExtension
                                  Is Modifierfalse
                                  Summaryfalse
                                  Alternate Namesextensions, user content
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                  SlicingThis element introduces a set of slices on Organization.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                  • value @ url
                                  • 160. Organization.identifier:adeliRang.use
                                    Definition

                                    The purpose of this identifier.

                                    Shortusual | official | temp | secondary | old (If known)
                                    Comments

                                    Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

                                    Control0..1
                                    BindingThe codes SHALL be taken from IdentifierUse
                                    (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

                                    Identifies the purpose for this identifier, if known .

                                    Typecode
                                    Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Summarytrue
                                    Requirements

                                    Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    162. Organization.identifier:adeliRang.type
                                    Definition

                                    A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

                                    ShortDescription of identifier
                                    Comments

                                    This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

                                    Control1..1
                                    BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
                                    (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

                                    A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

                                    TypeCodeableConcept
                                    Is Modifierfalse
                                    Summarytrue
                                    Requirements

                                    Allows users to make use of identifiers when the identifier system is not known.

                                    Pattern Value{
                                      "coding" : [{
                                        "system" : "https://hl7.fr/ig/fhir/core/CodeSystem/fr-core-cs-v2-0203",
                                        "code" : "INTRN"
                                      }]
                                    }
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    164. Organization.identifier:adeliRang.system
                                    Definition

                                    Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

                                    ShortThe namespace for the identifier value
                                    Comments

                                    Identifier.system is always case sensitive.

                                    Control0..1
                                    Typeuri
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Summarytrue
                                    Requirements

                                    There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

                                    Pattern Valuehttps://adelirang.esante.gouv.fr
                                    Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    166. Organization.identifier:adeliRang.value
                                    Definition

                                    The portion of the identifier typically relevant to the user and which is unique within the context of the system.

                                    ShortThe value that is unique
                                    Comments

                                    If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

                                    Control0..1
                                    Typestring
                                    Is Modifierfalse
                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                    Summarytrue
                                    Example<br/><b>General</b>:123456
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    168. Organization.identifier:adeliRang.period
                                    Definition

                                    Time period during which identifier is/was valid for use.

                                    ShortTime period when id is/was valid for use
                                    Control0..1
                                    TypePeriod
                                    Is Modifierfalse
                                    Summarytrue
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    170. Organization.identifier:adeliRang.assigner
                                    Definition

                                    Organization that issued/manages the identifier.

                                    ShortOrganization that issued id (may be just text)
                                    Comments

                                    The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

                                    Control0..1
                                    TypeReference(Organization)
                                    Is Modifierfalse
                                    Summarytrue
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    172. Organization.identifier:rppsRang
                                    Slice NamerppsRang
                                    Definition

                                    Identifier for the organization that is used to identify the organization across multiple disparate systems.

                                    ShortRPPS rang (11 chiffres RPPS + 2 chiffres RANG)
                                    NoteThis is a business identifier, not a resource identifier (see discussion)
                                    Control0..*
                                    This element is affected by the following invariants: org-1
                                    TypeIdentifier
                                    Is Modifierfalse
                                    Summarytrue
                                    Requirements

                                    Organizations are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the organization.

                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    174. Organization.identifier:rppsRang.id
                                    Definition

                                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                    ShortUnique id for inter-element referencing
                                    Control0..1
                                    Typestring
                                    Is Modifierfalse
                                    XML FormatIn the XML format, this property is represented as an attribute.
                                    Summaryfalse
                                    176. Organization.identifier:rppsRang.extension
                                    Definition

                                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                    ShortAdditional content defined by implementations
                                    Comments

                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                    Control0..*
                                    TypeExtension
                                    Is Modifierfalse
                                    Summaryfalse
                                    Alternate Namesextensions, user content
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                    SlicingThis element introduces a set of slices on Organization.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                    • value @ url
                                    • 178. Organization.identifier:rppsRang.use
                                      Definition

                                      The purpose of this identifier.

                                      Shortusual | official | temp | secondary | old (If known)
                                      Comments

                                      Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

                                      Control0..1
                                      BindingThe codes SHALL be taken from IdentifierUse
                                      (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

                                      Identifies the purpose for this identifier, if known .

                                      Typecode
                                      Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                      Summarytrue
                                      Requirements

                                      Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      180. Organization.identifier:rppsRang.type
                                      Definition

                                      A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

                                      ShortDescription of identifier
                                      Comments

                                      This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

                                      Control1..1
                                      BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
                                      (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

                                      A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

                                      TypeCodeableConcept
                                      Is Modifierfalse
                                      Summarytrue
                                      Requirements

                                      Allows users to make use of identifiers when the identifier system is not known.

                                      Pattern Value{
                                        "coding" : [{
                                          "system" : "https://hl7.fr/ig/fhir/core/CodeSystem/fr-core-cs-v2-0203",
                                          "code" : "INTRN"
                                        }]
                                      }
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      182. Organization.identifier:rppsRang.system
                                      Definition

                                      Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

                                      ShortThe namespace for the identifier value
                                      Comments

                                      Identifier.system is always case sensitive.

                                      Control0..1
                                      Typeuri
                                      Is Modifierfalse
                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                      Summarytrue
                                      Requirements

                                      There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

                                      Pattern Valuehttps://rppsrang.esante.gouv.fr
                                      Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      184. Organization.identifier:rppsRang.value
                                      Definition

                                      The portion of the identifier typically relevant to the user and which is unique within the context of the system.

                                      ShortThe value that is unique
                                      Comments

                                      If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

                                      Control0..1
                                      Typestring
                                      Is Modifierfalse
                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                      Summarytrue
                                      Example<br/><b>General</b>:123456
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      186. Organization.identifier:rppsRang.period
                                      Definition

                                      Time period during which identifier is/was valid for use.

                                      ShortTime period when id is/was valid for use
                                      Control0..1
                                      TypePeriod
                                      Is Modifierfalse
                                      Summarytrue
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      188. Organization.identifier:rppsRang.assigner
                                      Definition

                                      Organization that issued/manages the identifier.

                                      ShortOrganization that issued id (may be just text)
                                      Comments

                                      The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

                                      Control0..1
                                      TypeReference(Organization)
                                      Is Modifierfalse
                                      Summarytrue
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      190. Organization.active
                                      Definition

                                      Whether the organization's record is still in active use.

                                      ShortWhether the organization's record is still in active use
                                      Comments

                                      This active flag is not intended to be used to mark an organization as temporarily closed or under construction. Instead the Location(s) within the Organization should have the suspended status. If further details of the reason for the suspension are required, then an extension on this element should be used.

                                      This element is labeled as a modifier because it may be used to mark that the resource was created in error.

                                      Control0..1
                                      Typeboolean
                                      Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                      Summarytrue
                                      Requirements

                                      Need a flag to indicate a record is no longer to be used and should generally be hidden for the user in the UI.

                                      Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      192. Organization.type
                                      Definition

                                      The kind(s) of organization that this is.

                                      ShortKind of organization
                                      Comments

                                      Organizations can be corporations, wards, sections, clinical teams, government departments, etc. Note that code is generally a classifier of the type of organization; in many applications, codes are used to identity a particular organization (say, ward) as opposed to another of the same type - these are identifiers, not codes

                                      When considering if multiple types are appropriate, you should evaluate if child organizations would be a more appropriate use of the concept, as different types likely are in different sub-areas of the organization. This is most likely to be used where type values have orthogonal values, such as a religious, academic and medical center.

                                      We expect that some jurisdictions will profile this optionality to be a single cardinality.

                                      Control0..*
                                      BindingFor example codes, see OrganizationType
                                      (example to http://hl7.org/fhir/ValueSet/organization-type)

                                      Used to categorize the organization.

                                      TypeCodeableConcept
                                      Is Modifierfalse
                                      Summarytrue
                                      Requirements

                                      Need to be able to track the kind of organization that this is - different organization types have different uses.

                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      SlicingThis element introduces a set of slices on Organization.type. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                      • pattern @ $this
                                      • 194. Organization.type:organizationType
                                        Slice NameorganizationType
                                        Definition

                                        The kind(s) of organization that this is.

                                        ShortKind of organization
                                        Comments

                                        Organizations can be corporations, wards, sections, clinical teams, government departments, etc. Note that code is generally a classifier of the type of organization; in many applications, codes are used to identity a particular organization (say, ward) as opposed to another of the same type - these are identifiers, not codes

                                        When considering if multiple types are appropriate, you should evaluate if child organizations would be a more appropriate use of the concept, as different types likely are in different sub-areas of the organization. This is most likely to be used where type values have orthogonal values, such as a religious, academic and medical center.

                                        We expect that some jurisdictions will profile this optionality to be a single cardinality.

                                        Control0..1
                                        BindingThe codes SHALL be taken from FR Core ValueSet Organization type
                                        (required to https://hl7.fr/ig/fhir/core/ValueSet/fr-core-vs-organization-type)
                                        TypeCodeableConcept
                                        Is Modifierfalse
                                        Summarytrue
                                        Requirements

                                        Need to be able to track the kind of organization that this is - different organization types have different uses.

                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        196. Organization.type:organizationType.id
                                        Definition

                                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                        ShortUnique id for inter-element referencing
                                        Control0..1
                                        Typestring
                                        Is Modifierfalse
                                        XML FormatIn the XML format, this property is represented as an attribute.
                                        Summaryfalse
                                        198. Organization.type:organizationType.extension
                                        Definition

                                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                        ShortAdditional content defined by implementations
                                        Comments

                                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                        Control0..*
                                        TypeExtension
                                        Is Modifierfalse
                                        Summaryfalse
                                        Alternate Namesextensions, user content
                                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                        SlicingThis element introduces a set of slices on Organization.type.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                        • value @ url
                                        • 200. Organization.type:organizationType.coding
                                          Definition

                                          A reference to a code defined by a terminology system.

                                          ShortCode defined by a terminology system
                                          Comments

                                          Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                                          Control1..1
                                          TypeCoding
                                          Is Modifierfalse
                                          Summarytrue
                                          Requirements

                                          Allows for alternative encodings within a code system, and translations to other code systems.

                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          202. Organization.type:organizationType.coding.id
                                          Definition

                                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                          ShortUnique id for inter-element referencing
                                          Control0..1
                                          Typestring
                                          Is Modifierfalse
                                          XML FormatIn the XML format, this property is represented as an attribute.
                                          Summaryfalse
                                          204. Organization.type:organizationType.coding.extension
                                          Definition

                                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                          ShortAdditional content defined by implementations
                                          Comments

                                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                          Control0..*
                                          TypeExtension
                                          Is Modifierfalse
                                          Summaryfalse
                                          Alternate Namesextensions, user content
                                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                          SlicingThis element introduces a set of slices on Organization.type.coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                          • value @ url
                                          • 206. Organization.type:organizationType.coding.system
                                            Definition

                                            The identification of the code system that defines the meaning of the symbol in the code.

                                            ShortIdentity of the terminology system
                                            Comments

                                            The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

                                            Control1..1
                                            Typeuri
                                            Is Modifierfalse
                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                            Summarytrue
                                            Requirements

                                            Need to be unambiguous about the source of the definition of the symbol.

                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            208. Organization.type:organizationType.coding.version
                                            Definition

                                            The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

                                            ShortVersion of the system - if relevant
                                            Comments

                                            Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

                                            NoteThis is a business version Id, not a resource version Id (see discussion)
                                            Control0..1
                                            Typestring
                                            Is Modifierfalse
                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                            Summarytrue
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            210. Organization.type:organizationType.coding.code
                                            Definition

                                            A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

                                            ShortSymbol in syntax defined by the system
                                            Control0..1
                                            Typecode
                                            Is Modifierfalse
                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                            Summarytrue
                                            Requirements

                                            Need to refer to a particular code in the system.

                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            212. Organization.type:organizationType.coding.display
                                            Definition

                                            A representation of the meaning of the code in the system, following the rules of the system.

                                            ShortRepresentation defined by the system
                                            Control0..1
                                            Typestring
                                            Is Modifierfalse
                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                            Summarytrue
                                            Requirements

                                            Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            214. Organization.type:organizationType.coding.userSelected
                                            Definition

                                            Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

                                            ShortIf this coding was chosen directly by the user
                                            Comments

                                            Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

                                            Control0..1
                                            Typeboolean
                                            Is Modifierfalse
                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                            Summarytrue
                                            Requirements

                                            This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            216. Organization.type:organizationType.text
                                            Definition

                                            A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                                            ShortPlain text representation of the concept
                                            Comments

                                            Very often the text is the same as a displayName of one of the codings.

                                            Control0..1
                                            Typestring
                                            Is Modifierfalse
                                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                            Summarytrue
                                            Requirements

                                            The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            218. Organization.type:secteurActiviteRASS
                                            Slice NamesecteurActiviteRASS
                                            Definition

                                            The kind(s) of organization that this is.

                                            ShortSecteurs d'activité des établissements avec la même activité dans le RASS
                                            Comments

                                            Organizations can be corporations, wards, sections, clinical teams, government departments, etc. Note that code is generally a classifier of the type of organization; in many applications, codes are used to identity a particular organization (say, ward) as opposed to another of the same type - these are identifiers, not codes

                                            When considering if multiple types are appropriate, you should evaluate if child organizations would be a more appropriate use of the concept, as different types likely are in different sub-areas of the organization. This is most likely to be used where type values have orthogonal values, such as a religious, academic and medical center.

                                            We expect that some jurisdictions will profile this optionality to be a single cardinality.

                                            Control0..1
                                            BindingThe codes SHALL be taken from JDV_J101-SecteurActivite-RASS
                                            (required to https://mos.esante.gouv.fr/NOS/JDV_J101-SecteurActivite-RASS/FHIR/JDV-J101-SecteurActivite-RASS)
                                            TypeCodeableConcept
                                            Is Modifierfalse
                                            Summarytrue
                                            Requirements

                                            Need to be able to track the kind of organization that this is - different organization types have different uses.

                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            220. Organization.type:secteurActiviteRASS.id
                                            Definition

                                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                            ShortUnique id for inter-element referencing
                                            Control0..1
                                            Typestring
                                            Is Modifierfalse
                                            XML FormatIn the XML format, this property is represented as an attribute.
                                            Summaryfalse
                                            222. Organization.type:secteurActiviteRASS.extension
                                            Definition

                                            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                            ShortAdditional content defined by implementations
                                            Comments

                                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                            Control0..*
                                            TypeExtension
                                            Is Modifierfalse
                                            Summaryfalse
                                            Alternate Namesextensions, user content
                                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                            SlicingThis element introduces a set of slices on Organization.type.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                            • value @ url
                                            • 224. Organization.type:secteurActiviteRASS.coding
                                              Definition

                                              A reference to a code defined by a terminology system.

                                              ShortCode defined by a terminology system
                                              Comments

                                              Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                                              Control1..1
                                              TypeCoding
                                              Is Modifierfalse
                                              Summarytrue
                                              Requirements

                                              Allows for alternative encodings within a code system, and translations to other code systems.

                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              226. Organization.type:secteurActiviteRASS.coding.id
                                              Definition

                                              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                              ShortUnique id for inter-element referencing
                                              Control0..1
                                              Typestring
                                              Is Modifierfalse
                                              XML FormatIn the XML format, this property is represented as an attribute.
                                              Summaryfalse
                                              228. Organization.type:secteurActiviteRASS.coding.extension
                                              Definition

                                              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                              ShortAdditional content defined by implementations
                                              Comments

                                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                              Control0..*
                                              TypeExtension
                                              Is Modifierfalse
                                              Summaryfalse
                                              Alternate Namesextensions, user content
                                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                              SlicingThis element introduces a set of slices on Organization.type.coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                              • value @ url
                                              • 230. Organization.type:secteurActiviteRASS.coding.system
                                                Definition

                                                The identification of the code system that defines the meaning of the symbol in the code.

                                                ShortIdentity of the terminology system
                                                Comments

                                                The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

                                                Control1..1
                                                Typeuri
                                                Is Modifierfalse
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Summarytrue
                                                Requirements

                                                Need to be unambiguous about the source of the definition of the symbol.

                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                232. Organization.type:secteurActiviteRASS.coding.version
                                                Definition

                                                The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

                                                ShortVersion of the system - if relevant
                                                Comments

                                                Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

                                                NoteThis is a business version Id, not a resource version Id (see discussion)
                                                Control0..1
                                                Typestring
                                                Is Modifierfalse
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Summarytrue
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                234. Organization.type:secteurActiviteRASS.coding.code
                                                Definition

                                                A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

                                                ShortSymbol in syntax defined by the system
                                                Control0..1
                                                Typecode
                                                Is Modifierfalse
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Summarytrue
                                                Requirements

                                                Need to refer to a particular code in the system.

                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                236. Organization.type:secteurActiviteRASS.coding.display
                                                Definition

                                                A representation of the meaning of the code in the system, following the rules of the system.

                                                ShortRepresentation defined by the system
                                                Control0..1
                                                Typestring
                                                Is Modifierfalse
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Summarytrue
                                                Requirements

                                                Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                238. Organization.type:secteurActiviteRASS.coding.userSelected
                                                Definition

                                                Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

                                                ShortIf this coding was chosen directly by the user
                                                Comments

                                                Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

                                                Control0..1
                                                Typeboolean
                                                Is Modifierfalse
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Summarytrue
                                                Requirements

                                                This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                240. Organization.type:secteurActiviteRASS.text
                                                Definition

                                                A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                                                ShortPlain text representation of the concept
                                                Comments

                                                Very often the text is the same as a displayName of one of the codings.

                                                Control0..1
                                                Typestring
                                                Is Modifierfalse
                                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                Summarytrue
                                                Requirements

                                                The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                242. Organization.type:categorieEtablissementRASS
                                                Slice NamecategorieEtablissementRASS
                                                Definition

                                                The kind(s) of organization that this is.

                                                ShortCatégorie d'établissement du RASS
                                                Comments

                                                Organizations can be corporations, wards, sections, clinical teams, government departments, etc. Note that code is generally a classifier of the type of organization; in many applications, codes are used to identity a particular organization (say, ward) as opposed to another of the same type - these are identifiers, not codes

                                                When considering if multiple types are appropriate, you should evaluate if child organizations would be a more appropriate use of the concept, as different types likely are in different sub-areas of the organization. This is most likely to be used where type values have orthogonal values, such as a religious, academic and medical center.

                                                We expect that some jurisdictions will profile this optionality to be a single cardinality.

                                                Control0..1
                                                BindingThe codes SHALL be taken from JDV_J129-CategorieEtablissement-RASS
                                                (required to https://mos.esante.gouv.fr/NOS/JDV_J129-CategorieEtablissement-RASS/FHIR/JDV-J129-CategorieEtablissement-RASS)
                                                TypeCodeableConcept
                                                Is Modifierfalse
                                                Summarytrue
                                                Requirements

                                                Need to be able to track the kind of organization that this is - different organization types have different uses.

                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                244. Organization.type:categorieEtablissementRASS.id
                                                Definition

                                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                ShortUnique id for inter-element referencing
                                                Control0..1
                                                Typestring
                                                Is Modifierfalse
                                                XML FormatIn the XML format, this property is represented as an attribute.
                                                Summaryfalse
                                                246. Organization.type:categorieEtablissementRASS.extension
                                                Definition

                                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                ShortAdditional content defined by implementations
                                                Comments

                                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                Control0..*
                                                TypeExtension
                                                Is Modifierfalse
                                                Summaryfalse
                                                Alternate Namesextensions, user content
                                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                SlicingThis element introduces a set of slices on Organization.type.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                • value @ url
                                                • 248. Organization.type:categorieEtablissementRASS.coding
                                                  Definition

                                                  A reference to a code defined by a terminology system.

                                                  ShortCode defined by a terminology system
                                                  Comments

                                                  Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                                                  Control1..1
                                                  TypeCoding
                                                  Is Modifierfalse
                                                  Summarytrue
                                                  Requirements

                                                  Allows for alternative encodings within a code system, and translations to other code systems.

                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                  250. Organization.type:categorieEtablissementRASS.coding.id
                                                  Definition

                                                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                  ShortUnique id for inter-element referencing
                                                  Control0..1
                                                  Typestring
                                                  Is Modifierfalse
                                                  XML FormatIn the XML format, this property is represented as an attribute.
                                                  Summaryfalse
                                                  252. Organization.type:categorieEtablissementRASS.coding.extension
                                                  Definition

                                                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                  ShortAdditional content defined by implementations
                                                  Comments

                                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                  Control0..*
                                                  TypeExtension
                                                  Is Modifierfalse
                                                  Summaryfalse
                                                  Alternate Namesextensions, user content
                                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                  SlicingThis element introduces a set of slices on Organization.type.coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                  • value @ url
                                                  • 254. Organization.type:categorieEtablissementRASS.coding.system
                                                    Definition

                                                    The identification of the code system that defines the meaning of the symbol in the code.

                                                    ShortIdentity of the terminology system
                                                    Comments

                                                    The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

                                                    Control1..1
                                                    Typeuri
                                                    Is Modifierfalse
                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                    Summarytrue
                                                    Requirements

                                                    Need to be unambiguous about the source of the definition of the symbol.

                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    256. Organization.type:categorieEtablissementRASS.coding.version
                                                    Definition

                                                    The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

                                                    ShortVersion of the system - if relevant
                                                    Comments

                                                    Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

                                                    NoteThis is a business version Id, not a resource version Id (see discussion)
                                                    Control0..1
                                                    Typestring
                                                    Is Modifierfalse
                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                    Summarytrue
                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    258. Organization.type:categorieEtablissementRASS.coding.code
                                                    Definition

                                                    A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

                                                    ShortSymbol in syntax defined by the system
                                                    Control0..1
                                                    Typecode
                                                    Is Modifierfalse
                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                    Summarytrue
                                                    Requirements

                                                    Need to refer to a particular code in the system.

                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    260. Organization.type:categorieEtablissementRASS.coding.display
                                                    Definition

                                                    A representation of the meaning of the code in the system, following the rules of the system.

                                                    ShortRepresentation defined by the system
                                                    Control0..1
                                                    Typestring
                                                    Is Modifierfalse
                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                    Summarytrue
                                                    Requirements

                                                    Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    262. Organization.type:categorieEtablissementRASS.coding.userSelected
                                                    Definition

                                                    Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

                                                    ShortIf this coding was chosen directly by the user
                                                    Comments

                                                    Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

                                                    Control0..1
                                                    Typeboolean
                                                    Is Modifierfalse
                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                    Summarytrue
                                                    Requirements

                                                    This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    264. Organization.type:categorieEtablissementRASS.text
                                                    Definition

                                                    A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                                                    ShortPlain text representation of the concept
                                                    Comments

                                                    Very often the text is the same as a displayName of one of the codings.

                                                    Control0..1
                                                    Typestring
                                                    Is Modifierfalse
                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                    Summarytrue
                                                    Requirements

                                                    The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    266. Organization.name
                                                    Definition

                                                    A name associated with the organization.

                                                    ShortName used for the organization
                                                    Comments

                                                    If the name of an organization changes, consider putting the old name in the alias column so that it can still be located through searches.

                                                    Control0..1
                                                    This element is affected by the following invariants: org-1
                                                    Typestring
                                                    Is Modifierfalse
                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                    Summarytrue
                                                    Requirements

                                                    Need to use the name as the label of the organization.

                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    268. Organization.alias
                                                    Definition

                                                    A list of alternate names that the organization is known as, or was known as in the past.

                                                    ShortA list of alternate names that the organization is known as, or was known as in the past
                                                    Comments

                                                    There are no dates associated with the alias/historic names, as this is not intended to track when names were used, but to assist in searching so that older names can still result in identifying the organization.

                                                    Control0..*
                                                    Typestring
                                                    Is Modifierfalse
                                                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                    Summaryfalse
                                                    Requirements

                                                    Over time locations and organizations go through many changes and can be known by different names.

                                                    For searching knowing previous names that the organization was known by can be very useful.

                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    270. Organization.telecom
                                                    Definition

                                                    Details for all kinds of technology mediated contact points for a person or organization, including telephone, email, etc.

                                                    ShortDetails of a Technology mediated contact point (phone, fax, email, etc.)
                                                    Comments

                                                    The use code 'home' is not to be used. Note that these contacts are not the contact details of people who are employed by or represent the organization, but official contacts for the organization itself.

                                                    Control0..*
                                                    This element is affected by the following invariants: ele-1
                                                    TypeContactPoint(FR Core Contact Point Profile)
                                                    Is Modifierfalse
                                                    Requirements

                                                    Human contact for the organization.

                                                    Invariantscpt-2: A system is required if a value is provided. (value.empty() or system.exists())
                                                    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    org-3: The telecom of an organization can never be of use 'home' (where(use = 'home').empty())
                                                    272. Organization.address
                                                    Definition

                                                    An address expressed using postal conventions (as opposed to GPS or other location definition formats). This data type may be used to convey addresses for use in delivering mail as well as for visiting locations which might not be valid for mail delivery. There are a variety of postal address formats defined around the world.

                                                    ShortAn address expressed using postal conventions (as opposed to GPS or other location definition formats)
                                                    Comments

                                                    Note: address is intended to describe postal addresses for administrative purposes, not to describe absolute geographical coordinates. Postal addresses are often used as proxies for physical locations (also see the Location resource).

                                                    Control0..*
                                                    This element is affected by the following invariants: ele-1
                                                    TypeAddress(FR Core Address Profile)
                                                    Is Modifierfalse
                                                    Requirements

                                                    May need to keep track of the organization's addresses for contacting, billing or reporting requirements.

                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    org-2: An address of an organization can never be of use 'home' (where(use = 'home').empty())
                                                    274. Organization.partOf
                                                    Definition

                                                    The organization of which this organization forms a part.

                                                    ShortThe organization of which this organization forms a part
                                                    Control0..1
                                                    TypeReference(FR Core Organization Profile)
                                                    Is Modifierfalse
                                                    Summarytrue
                                                    Requirements

                                                    Need to be able to track the hierarchy of organizations within an organization.

                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    276. Organization.partOf.id
                                                    Definition

                                                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                    ShortUnique id for inter-element referencing
                                                    Control0..1
                                                    Typestring
                                                    Is Modifierfalse
                                                    XML FormatIn the XML format, this property is represented as an attribute.
                                                    Summaryfalse
                                                    278. Organization.partOf.extension
                                                    Definition

                                                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                    ShortAdditional content defined by implementations
                                                    Comments

                                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                    Control0..*
                                                    TypeExtension
                                                    Is Modifierfalse
                                                    Summaryfalse
                                                    Alternate Namesextensions, user content
                                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                    SlicingThis element introduces a set of slices on Organization.partOf.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                                    • value @ url
                                                    • 280. Organization.partOf.reference
                                                      Definition

                                                      A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

                                                      ShortLiteral reference, Relative, internal or absolute URL
                                                      Comments

                                                      Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

                                                      Control0..1
                                                      This element is affected by the following invariants: ref-1
                                                      Typestring
                                                      Is Modifierfalse
                                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                      Summarytrue
                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      282. Organization.partOf.type
                                                      Definition

                                                      The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

                                                      The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

                                                      ShortType the reference refers to (e.g. "Patient")
                                                      Comments

                                                      This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

                                                      Control0..1
                                                      BindingUnless not suitable, these codes SHALL be taken from FR Core ValueSet Organization type
                                                      (extensible to https://hl7.fr/ig/fhir/core/ValueSet/fr-core-vs-organization-type)
                                                      Typeuri
                                                      Is Modifierfalse
                                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                      Summarytrue
                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      284. Organization.partOf.identifier
                                                      Definition

                                                      An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

                                                      ShortLogical reference, when literal reference is not known
                                                      Comments

                                                      When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

                                                      When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

                                                      Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

                                                      Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

                                                      NoteThis is a business identifier, not a resource identifier (see discussion)
                                                      Control0..1
                                                      TypeIdentifier
                                                      Is Modifierfalse
                                                      Summarytrue
                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      286. Organization.partOf.display
                                                      Definition

                                                      Plain text narrative that identifies the resource in addition to the resource reference.

                                                      ShortText alternative for the resource
                                                      Comments

                                                      This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

                                                      Control0..1
                                                      Typestring
                                                      Is Modifierfalse
                                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                                      Summarytrue
                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      288. Organization.contact
                                                      Definition

                                                      Contact for the organization for a certain purpose.

                                                      ShortContact for the organization for a certain purpose
                                                      Comments

                                                      Where multiple contacts for the same purpose are provided there is a standard extension that can be used to determine which one is the preferred contact to use.

                                                      Control0..*
                                                      TypeBackboneElement
                                                      Is Modifierfalse
                                                      Summaryfalse
                                                      Requirements

                                                      Need to keep track of assigned contact points within bigger organization.

                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      290. Organization.contact.id
                                                      Definition

                                                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                                      ShortUnique id for inter-element referencing
                                                      Control0..1
                                                      Typestring
                                                      Is Modifierfalse
                                                      XML FormatIn the XML format, this property is represented as an attribute.
                                                      Summaryfalse
                                                      292. Organization.contact.extension
                                                      Definition

                                                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                                      ShortAdditional content defined by implementations
                                                      Comments

                                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                      Control0..*
                                                      TypeExtension
                                                      Is Modifierfalse
                                                      Summaryfalse
                                                      Alternate Namesextensions, user content
                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                      294. Organization.contact.modifierExtension
                                                      Definition

                                                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                                      ShortExtensions that cannot be ignored even if unrecognized
                                                      Comments

                                                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                                      Control0..*
                                                      TypeExtension
                                                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                                      Summarytrue
                                                      Requirements

                                                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                                      Alternate Namesextensions, user content, modifiers
                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                                      296. Organization.contact.purpose
                                                      Definition

                                                      Indicates a purpose for which the contact can be reached.

                                                      ShortThe type of contact
                                                      Control0..1
                                                      BindingUnless not suitable, these codes SHALL be taken from ContactEntityType
                                                      (extensible to http://hl7.org/fhir/ValueSet/contactentity-type)

                                                      The purpose for which you would contact a contact party.

                                                      TypeCodeableConcept
                                                      Is Modifierfalse
                                                      Summaryfalse
                                                      Requirements

                                                      Need to distinguish between multiple contact persons.

                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      298. Organization.contact.name
                                                      Definition

                                                      A name associated with the contact.

                                                      ShortA name associated with the contact
                                                      Control0..1
                                                      TypeHumanName
                                                      Is Modifierfalse
                                                      Summaryfalse
                                                      Requirements

                                                      Need to be able to track the person by name.

                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      300. Organization.contact.telecom
                                                      Definition

                                                      Details for all kinds of technology mediated contact points for a person or organization, including telephone, email, etc.

                                                      ShortDetails of a Technology mediated contact point (phone, fax, email, etc.)
                                                      Control0..*
                                                      This element is affected by the following invariants: ele-1
                                                      TypeContactPoint(FR Core Contact Point Profile)
                                                      Is Modifierfalse
                                                      Requirements

                                                      People have (primary) ways to contact them in some way such as phone, email.

                                                      Invariantscpt-2: A system is required if a value is provided. (value.empty() or system.exists())
                                                      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      302. Organization.contact.address
                                                      Definition

                                                      An address expressed using postal conventions (as opposed to GPS or other location definition formats). This data type may be used to convey addresses for use in delivering mail as well as for visiting locations which might not be valid for mail delivery. There are a variety of postal address formats defined around the world.

                                                      ShortAn address expressed using postal conventions (as opposed to GPS or other location definition formats)
                                                      Comments

                                                      Note: address is intended to describe postal addresses for administrative purposes, not to describe absolute geographical coordinates. Postal addresses are often used as proxies for physical locations (also see the Location resource).

                                                      Control0..1
                                                      This element is affected by the following invariants: ele-1
                                                      TypeAddress(FR Core Address Profile)
                                                      Is Modifierfalse
                                                      Requirements

                                                      May need to keep track of a contact party's address for contacting, billing or reporting requirements.

                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                                      304. Organization.endpoint
                                                      Definition

                                                      Technical endpoints providing access to services operated for the organization.

                                                      ShortTechnical endpoints providing access to services operated for the organization
                                                      Control0..*
                                                      TypeReference(Endpoint)
                                                      Is Modifierfalse
                                                      Summaryfalse
                                                      Requirements

                                                      Organizations have multiple systems that provide various services and need to be able to define the technical connection details for how to connect to them, and for what purpose.

                                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))