Guide d'implémentation Fr Core
2.1.0-ballot - ballot France flag

This page is part of the Guide d'implémentation Fr Core (v2.1.0-ballot: trial-use Ballot 6) based on FHIR (HL7® FHIR® Standard) R4. The current version which supersedes this version is 2.0.1. For a full list of available versions, see the Directory of published versions

Resource Profile: FRCoreMedicationAdministrationInhaledOxygenProfile - Detailed Descriptions

Active as of 2024-07-17

Definitions for the fr-core-medication-administration-inhaled-oxygen resource profile.

Guidance on how to interpret the contents of this table can be found here

0. MedicationAdministration
2. MedicationAdministration.meta
4. MedicationAdministration.meta.profile
SlicingThis element introduces a set of slices on MedicationAdministration.meta.profile. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ $this
  • 6. MedicationAdministration.meta.profile:fr-canonical
    Slice Namefr-canonical
    Control0..1
    Pattern Valuehttps://hl7.fr/ig/fhir/core/StructureDefinition/fr-core-medication-administration-inhaled-oxygen
    8. MedicationAdministration.medication[x]
    TypeCodeableConcept, Reference(Medication)
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    10. MedicationAdministration.medication[x].coding
    Control1..1
    12. MedicationAdministration.medication[x].coding.system
    Control1..?
    Fixed Valuehttp://snomed.info/sct
    14. MedicationAdministration.medication[x].coding.code
    ShortProduct containing oxygen (medicinal product) | Administration d'oxygène
    Control1..?
    Fixed Value767111007
    16. MedicationAdministration.subject
    TypeReference(FR Core Patient Profile)
    18. MedicationAdministration.performer
    20. MedicationAdministration.performer.actor
    TypeReference(RelatedPerson, Device, FR Core Practitioner Profile, PractitionerRole, FR Core Patient Profile)

    Guidance on how to interpret the contents of this table can be found here

    0. MedicationAdministration
    Definition

    Describes the event of a patient consuming or otherwise being administered a medication. This may be as simple as swallowing a tablet or it may be a long running infusion. Related resources tie this event to the authorizing prescription, and the specific encounter between patient and health care practitioner.

    ShortAdministration of medication to a patient
    Control0..*
    Is Modifierfalse
    Summaryfalse
    Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
    dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
    dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
    dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
    dom-6: A resource should have narrative for robust management (text.`div`.exists())
    2. MedicationAdministration.implicitRules
    Definition

    A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

    ShortA set of rules under which this content was created
    Comments

    Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

    Control0..1
    Typeuri
    Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    4. MedicationAdministration.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
    Summaryfalse
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    6. MedicationAdministration.status
    Definition

    Will generally be set to show that the administration has been completed. For some long running administrations such as infusions, it is possible for an administration to be started but not completed or it may be paused while some other process is under way.

    Shortin-progress | not-done | on-hold | completed | entered-in-error | stopped | unknown
    Comments

    This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

    Control1..1
    BindingThe codes SHALL be taken from MedicationAdministration Status Codeshttp://hl7.org/fhir/ValueSet/medication-admin-status|4.0.1
    (required to http://hl7.org/fhir/ValueSet/medication-admin-status|4.0.1)

    A set of codes indicating the current status of a MedicationAdministration.

    Typecode
    Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    8. MedicationAdministration.medication[x]
    Definition

    Identifies the medication that was administered. This is either a link to a resource representing the details of the medication or a simple attribute carrying a code that identifies the medication from a known list of medications.

    ShortWhat was administered
    Comments

    If only a code is specified, then it needs to be a code for a specific product. If more information is required, then the use of the medication resource is recommended. For example, if you require form or lot number, then you must reference the Medication resource.

    Control1..1
    BindingFor example codes, see SNOMEDCTMedicationCodeshttp://hl7.org/fhir/ValueSet/medication-codes
    (example to http://hl7.org/fhir/ValueSet/medication-codes)

    Codes identifying substance or product that can be administered.

    TypeCodeableConcept, Reference(Medication)
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    10. MedicationAdministration.medication[x].coding
    Definition

    A reference to a code defined by a terminology system.

    ShortCode defined by a terminology system
    Comments

    Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

    Control10..1*
    TypeCoding
    Is Modifierfalse
    Summarytrue
    Requirements

    Allows for alternative encodings within a code system, and translations to other code systems.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    12. MedicationAdministration.medication[x].coding.system
    Definition

    The identification of the code system that defines the meaning of the symbol in the code.

    ShortIdentity of the terminology system
    Comments

    The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

    Control10..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    Need to be unambiguous about the source of the definition of the symbol.

    Fixed Valuehttp://snomed.info/sct
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    14. MedicationAdministration.medication[x].coding.code
    Definition

    A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

    ShortProduct containing oxygen (medicinal product) | Administration d'oxygèneSymbol in syntax defined by the system
    Control10..1
    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    Need to refer to a particular code in the system.

    Fixed Value767111007
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    16. MedicationAdministration.subject
    Definition

    The person or animal or group receiving the medication.

    ShortWho received medication
    Control1..1
    TypeReference(FR Core Patient Profile, Patient, Group)
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    18. MedicationAdministration.effective[x]
    Definition

    A specific date/time or interval of time during which the administration took place (or did not take place, when the 'notGiven' attribute is true). For many administrations, such as swallowing a tablet the use of dateTime is more appropriate.

    ShortStart and end time of administration
    Control1..1
    TypeChoice of: dateTime, Period
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

    Guidance on how to interpret the contents of this table can be found here

    0. MedicationAdministration
    Definition

    Describes the event of a patient consuming or otherwise being administered a medication. This may be as simple as swallowing a tablet or it may be a long running infusion. Related resources tie this event to the authorizing prescription, and the specific encounter between patient and health care practitioner.

    ShortAdministration of medication to a patient
    Control0..*
    Is Modifierfalse
    Summaryfalse
    Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
    dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
    dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
    dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
    dom-6: A resource should have narrative for robust management (text.`div`.exists())
    2. MedicationAdministration.id
    Definition

    The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

    ShortLogical id of this artifact
    Comments

    The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

    Control0..1
    Typeid
    Is Modifierfalse
    Summarytrue
    4. MedicationAdministration.meta
    Definition

    The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

    ShortMetadata about the resource
    Control0..1
    TypeMeta
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    6. MedicationAdministration.meta.id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    ShortUnique id for inter-element referencing
    Control0..1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    8. MedicationAdministration.meta.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on MedicationAdministration.meta.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 10. MedicationAdministration.meta.versionId
      Definition

      The version specific identifier, as it appears in the version portion of the URL. This value changes when the resource is created, updated, or deleted.

      ShortVersion specific identifier
      Comments

      The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes.

      Control0..1
      Typeid
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      12. MedicationAdministration.meta.lastUpdated
      Definition

      When the resource last changed - e.g. when the version changed.

      ShortWhen the resource version last changed
      Comments

      This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a read interaction.

      Control0..1
      Typeinstant
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      14. MedicationAdministration.meta.source
      Definition

      A uri that identifies the source system of the resource. This provides a minimal amount of Provenance information that can be used to track or differentiate the source of information in the resource. The source may identify another FHIR server, document, message, database, etc.

      ShortIdentifies where the resource comes from
      Comments

      In the provenance resource, this corresponds to Provenance.entity.what[x]. The exact use of the source (and the implied Provenance.entity.role) is left to implementer discretion. Only one nominated source is allowed; for additional provenance details, a full Provenance resource should be used.

      This element can be used to indicate where the current master source of a resource that has a canonical URL if the resource is no longer hosted at the canonical URL.

      Control0..1
      Typeuri
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      16. MedicationAdministration.meta.profile
      Definition

      A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url.

      ShortProfiles this resource claims to conform to
      Comments

      It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set.

      Control0..*
      Typecanonical(StructureDefinition)
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      SlicingThis element introduces a set of slices on MedicationAdministration.meta.profile. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ $this
      • 18. MedicationAdministration.meta.profile:fr-canonical
        Slice Namefr-canonical
        Definition

        A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url.

        ShortProfiles this resource claims to conform to
        Comments

        It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set.

        Control0..1
        Typecanonical(StructureDefinition)
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Pattern Valuehttps://hl7.fr/ig/fhir/core/StructureDefinition/fr-core-medication-administration-inhaled-oxygen
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        20. MedicationAdministration.meta.security
        Definition

        Security labels applied to this resource. These tags connect specific resources to the overall security policy and infrastructure.

        ShortSecurity Labels applied to this resource
        Comments

        The security labels can be updated without changing the stated version of the resource. The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored.

        Control0..*
        BindingUnless not suitable, these codes SHALL be taken from All Security Labels
        (extensible to http://hl7.org/fhir/ValueSet/security-labels)

        Security Labels from the Healthcare Privacy and Security Classification System.

        TypeCoding
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        22. MedicationAdministration.meta.tag
        Definition

        Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource.

        ShortTags applied to this resource
        Comments

        The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.

        Control0..*
        BindingFor example codes, see CommonTags
        (example to http://hl7.org/fhir/ValueSet/common-tags)

        Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones".

        TypeCoding
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        24. MedicationAdministration.implicitRules
        Definition

        A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

        ShortA set of rules under which this content was created
        Comments

        Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

        Control0..1
        Typeuri
        Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        26. MedicationAdministration.language
        Definition

        The base language in which the resource is written.

        ShortLanguage of the resource content
        Comments

        Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

        Control0..1
        BindingThe codes SHOULD be taken from CommonLanguages
        (preferred to http://hl7.org/fhir/ValueSet/languages)

        A human language.

        Additional BindingsPurpose
        AllLanguagesMax Binding
        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        28. MedicationAdministration.text
        Definition

        A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

        ShortText summary of the resource, for human interpretation
        Comments

        Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

        Control0..1
        TypeNarrative
        Is Modifierfalse
        Summaryfalse
        Alternate Namesnarrative, html, xhtml, display
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        30. MedicationAdministration.contained
        Definition

        These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

        ShortContained, inline Resources
        Comments

        This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

        Control0..*
        TypeResource
        Is Modifierfalse
        Summaryfalse
        Alternate Namesinline resources, anonymous resources, contained resources
        32. MedicationAdministration.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        34. MedicationAdministration.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
        Summaryfalse
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        36. MedicationAdministration.identifier
        Definition

        Identifiers associated with this Medication Administration that are defined by business processes and/or used to refer to it when a direct URL reference to the resource itself is not appropriate. They are business identifiers assigned to this resource by the performer or other systems and remain constant as the resource is updated and propagates from server to server.

        ShortExternal identifier
        Comments

        This is a business identifier, not a resource identifier.

        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control0..*
        TypeIdentifier
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        38. MedicationAdministration.instantiates
        Definition

        A protocol, guideline, orderset, or other definition that was adhered to in whole or in part by this event.

        ShortInstantiates protocol or definition
        Control0..*
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        40. MedicationAdministration.partOf
        Definition

        A larger event of which this particular event is a component or step.

        ShortPart of referenced event
        Control0..*
        TypeReference(MedicationAdministration, Procedure)
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        42. MedicationAdministration.status
        Definition

        Will generally be set to show that the administration has been completed. For some long running administrations such as infusions, it is possible for an administration to be started but not completed or it may be paused while some other process is under way.

        Shortin-progress | not-done | on-hold | completed | entered-in-error | stopped | unknown
        Comments

        This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

        Control1..1
        BindingThe codes SHALL be taken from MedicationAdministration Status Codes
        (required to http://hl7.org/fhir/ValueSet/medication-admin-status|4.0.1)

        A set of codes indicating the current status of a MedicationAdministration.

        Typecode
        Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        44. MedicationAdministration.statusReason
        Definition

        A code indicating why the administration was not performed.

        ShortReason administration not performed
        Control0..*
        BindingFor example codes, see SNOMEDCTReasonMedicationNotGivenCodes
        (example to http://hl7.org/fhir/ValueSet/reason-medication-not-given-codes)

        A set of codes indicating the reason why the MedicationAdministration is negated.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        46. MedicationAdministration.category
        Definition

        Indicates where the medication is expected to be consumed or administered.

        ShortType of medication usage
        Control0..1
        BindingThe codes SHOULD be taken from MedicationAdministration Category Codes
        (preferred to http://hl7.org/fhir/ValueSet/medication-admin-category)

        A coded concept describing where the medication administered is expected to occur.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        48. MedicationAdministration.medication[x]
        Definition

        Identifies the medication that was administered. This is either a link to a resource representing the details of the medication or a simple attribute carrying a code that identifies the medication from a known list of medications.

        ShortWhat was administered
        Comments

        If only a code is specified, then it needs to be a code for a specific product. If more information is required, then the use of the medication resource is recommended. For example, if you require form or lot number, then you must reference the Medication resource.

        Control1..1
        BindingFor example codes, see SNOMEDCTMedicationCodes
        (example to http://hl7.org/fhir/ValueSet/medication-codes)

        Codes identifying substance or product that can be administered.

        TypeCodeableConcept
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        50. MedicationAdministration.medication[x].id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        52. MedicationAdministration.medication[x].extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on MedicationAdministration.medication[x].extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 54. MedicationAdministration.medication[x].coding
          Definition

          A reference to a code defined by a terminology system.

          ShortCode defined by a terminology system
          Comments

          Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

          Control1..1
          TypeCoding
          Is Modifierfalse
          Summarytrue
          Requirements

          Allows for alternative encodings within a code system, and translations to other code systems.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          56. MedicationAdministration.medication[x].coding.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          58. MedicationAdministration.medication[x].coding.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on MedicationAdministration.medication[x].coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 60. MedicationAdministration.medication[x].coding.system
            Definition

            The identification of the code system that defines the meaning of the symbol in the code.

            ShortIdentity of the terminology system
            Comments

            The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

            Control1..1
            Typeuri
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            Need to be unambiguous about the source of the definition of the symbol.

            Fixed Valuehttp://snomed.info/sct
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            62. MedicationAdministration.medication[x].coding.version
            Definition

            The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

            ShortVersion of the system - if relevant
            Comments

            Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

            NoteThis is a business version Id, not a resource version Id (see discussion)
            Control0..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            64. MedicationAdministration.medication[x].coding.code
            Definition

            A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

            ShortProduct containing oxygen (medicinal product) | Administration d'oxygène
            Control1..1
            Typecode
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            Need to refer to a particular code in the system.

            Fixed Value767111007
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            66. MedicationAdministration.medication[x].coding.display
            Definition

            A representation of the meaning of the code in the system, following the rules of the system.

            ShortRepresentation defined by the system
            Control0..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            68. MedicationAdministration.medication[x].coding.userSelected
            Definition

            Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

            ShortIf this coding was chosen directly by the user
            Comments

            Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

            Control0..1
            Typeboolean
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            70. MedicationAdministration.medication[x].text
            Definition

            A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

            ShortPlain text representation of the concept
            Comments

            Very often the text is the same as a displayName of one of the codings.

            Control0..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            72. MedicationAdministration.subject
            Definition

            The person or animal or group receiving the medication.

            ShortWho received medication
            Control1..1
            TypeReference(FR Core Patient Profile)
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            74. MedicationAdministration.context
            Definition

            The visit, admission, or other contact between patient and health care provider during which the medication administration was performed.

            ShortEncounter or Episode of Care administered as part of
            Control0..1
            TypeReference(Encounter, EpisodeOfCare)
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            76. MedicationAdministration.supportingInformation
            Definition

            Additional information (for example, patient height and weight) that supports the administration of the medication.

            ShortAdditional information to support administration
            Control0..*
            TypeReference(Resource)
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            78. MedicationAdministration.effective[x]
            Definition

            A specific date/time or interval of time during which the administration took place (or did not take place, when the 'notGiven' attribute is true). For many administrations, such as swallowing a tablet the use of dateTime is more appropriate.

            ShortStart and end time of administration
            Control1..1
            TypeChoice of: dateTime, Period
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            80. MedicationAdministration.performer
            Definition

            Indicates who or what performed the medication administration and how they were involved.

            ShortWho performed the medication administration and what they did
            Control0..*
            TypeBackboneElement
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            82. MedicationAdministration.performer.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            84. MedicationAdministration.performer.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            86. MedicationAdministration.performer.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            88. MedicationAdministration.performer.function
            Definition

            Distinguishes the type of involvement of the performer in the medication administration.

            ShortType of performance
            Control0..1
            BindingFor example codes, see MedicationAdministration Performer Function Codes
            (example to http://hl7.org/fhir/ValueSet/med-admin-perform-function)

            A code describing the role an individual played in administering the medication.

            TypeCodeableConcept
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            90. MedicationAdministration.performer.actor
            Definition

            Indicates who or what performed the medication administration.

            ShortWho performed the medication administration
            Control1..1
            TypeReference(RelatedPerson, Device, FR Core Practitioner Profile, PractitionerRole, FR Core Patient Profile)
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            92. MedicationAdministration.reasonCode
            Definition

            A code indicating why the medication was given.

            ShortReason administration performed
            Control0..*
            BindingFor example codes, see ReasonMedicationGivenCodes
            (example to http://hl7.org/fhir/ValueSet/reason-medication-given-codes)

            A set of codes indicating the reason why the MedicationAdministration was made.

            TypeCodeableConcept
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            94. MedicationAdministration.reasonReference
            Definition

            Condition or observation that supports why the medication was administered.

            ShortCondition or observation that supports why the medication was administered
            Comments

            This is a reference to a condition that is the reason for the medication request. If only a code exists, use reasonCode.

            Control0..*
            TypeReference(Condition, Observation, DiagnosticReport)
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            96. MedicationAdministration.request
            Definition

            The original request, instruction or authority to perform the administration.

            ShortRequest administration performed against
            Comments

            This is a reference to the MedicationRequest where the intent is either order or instance-order. It should not reference MedicationRequests where the intent is any other value.

            Control0..1
            TypeReference(MedicationRequest)
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            98. MedicationAdministration.device
            Definition

            The device used in administering the medication to the patient. For example, a particular infusion pump.

            ShortDevice used to administer
            Control0..*
            TypeReference(Device)
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            100. MedicationAdministration.note
            Definition

            Extra information about the medication administration that is not conveyed by the other attributes.

            ShortInformation about the administration
            Control0..*
            TypeAnnotation
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            102. MedicationAdministration.dosage
            Definition

            Describes the medication dosage information details e.g. dose, rate, site, route, etc.

            ShortDetails of how medication was taken
            Control0..1
            TypeBackboneElement
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            mad-1: SHALL have at least one of dosage.dose or dosage.rate[x] (dose.exists() or rate.exists())
            104. MedicationAdministration.dosage.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            106. MedicationAdministration.dosage.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            108. MedicationAdministration.dosage.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            110. MedicationAdministration.dosage.text
            Definition

            Free text dosage can be used for cases where the dosage administered is too complex to code. When coded dosage is present, the free text dosage may still be present for display to humans.

            The dosage instructions should reflect the dosage of the medication that was administered.

            ShortFree text dosage instructions e.g. SIG
            Control0..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            112. MedicationAdministration.dosage.site
            Definition

            A coded specification of the anatomic site where the medication first entered the body. For example, "left arm".

            ShortBody site administered to
            Comments

            If the use case requires attributes from the BodySite resource (e.g. to identify and track separately) then use the standard extension bodySite. May be a summary code, or a reference to a very precise definition of the location, or both.

            Control0..1
            BindingFor example codes, see SNOMEDCTAnatomicalStructureForAdministrationSiteCodes
            (example to http://hl7.org/fhir/ValueSet/approach-site-codes)

            A coded concept describing the site location the medicine enters into or onto the body.

            TypeCodeableConcept
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            114. MedicationAdministration.dosage.route
            Definition

            A code specifying the route or physiological path of administration of a therapeutic agent into or onto the patient. For example, topical, intravenous, etc.

            ShortPath of substance into body
            Control0..1
            BindingFor example codes, see SNOMEDCTRouteCodes
            (example to http://hl7.org/fhir/ValueSet/route-codes)

            A coded concept describing the route or physiological path of administration of a therapeutic agent into or onto the body of a subject.

            TypeCodeableConcept
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            116. MedicationAdministration.dosage.method
            Definition

            A coded value indicating the method by which the medication is intended to be or was introduced into or on the body. This attribute will most often NOT be populated. It is most commonly used for injections. For example, Slow Push, Deep IV.

            ShortHow drug was administered
            Comments

            One of the reasons this attribute is not used often, is that the method is often pre-coordinated with the route and/or form of administration. This means the codes used in route or form may pre-coordinate the method in the route code or the form code. The implementation decision about what coding system to use for route or form code will determine how frequently the method code will be populated e.g. if route or form code pre-coordinate method code, then this attribute will not be populated often; if there is no pre-coordination then method code may be used frequently.

            Control0..1
            BindingFor example codes, see SNOMEDCTAdministrationMethodCodes
            (example to http://hl7.org/fhir/ValueSet/administration-method-codes)

            A coded concept describing the technique by which the medicine is administered.

            TypeCodeableConcept
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            118. MedicationAdministration.dosage.dose
            Definition

            The amount of the medication given at one administration event. Use this value when the administration is essentially an instantaneous event such as a swallowing a tablet or giving an injection.

            ShortAmount of medication per dose
            Comments

            If the administration is not instantaneous (rate is present), this can be specified to convey the total amount administered over period of time of a single administration.

            Control0..1
            TypeQuantity(SimpleQuantity)
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            120. MedicationAdministration.dosage.rate[x]
            Definition

            Identifies the speed with which the medication was or will be introduced into the patient. Typically, the rate for an infusion e.g. 100 ml per 1 hour or 100 ml/hr. May also be expressed as a rate per unit of time, e.g. 500 ml per 2 hours. Other examples: 200 mcg/min or 200 mcg/1 minute; 1 liter/8 hours.

            ShortDose quantity per unit of time
            Comments

            If the rate changes over time, and you want to capture this in MedicationAdministration, then each change should be captured as a distinct MedicationAdministration, with a specific MedicationAdministration.dosage.rate, and the date time when the rate change occurred. Typically, the MedicationAdministration.dosage.rate element is not used to convey an average rate.

            Control0..1
            TypeChoice of: Ratio, Quantity(SimpleQuantity)
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            122. MedicationAdministration.eventHistory
            Definition

            A summary of the events of interest that have occurred, such as when the administration was verified.

            ShortA list of events of interest in the lifecycle
            Comments

            This might not include provenances for all versions of the request – only those deemed “relevant” or important. This SHALL NOT include the Provenance associated with this current version of the resource. (If that provenance is deemed to be a “relevant” change, it will need to be added as part of a later update. Until then, it can be queried directly as the Provenance that points to this version using _revinclude All Provenances should have some historical version of this Request as their subject.

            Control0..*
            TypeReference(Provenance)
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))