Guide d'implémentation Fr Core
2.0.1 - trial-use France flag

This page is part of the Guide d'implémentation Fr Core (v2.0.1: Release) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions

Resource Profile: FRCoreScheduleProfile - Detailed Descriptions

Active as of 2024-04-16

Definitions for the fr-core-schedule resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Schedule
2. Schedule.meta
4. Schedule.meta.profile
SlicingThis element introduces a set of slices on Schedule.meta.profile. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ $this
  • 6. Schedule.meta.profile:fr-canonical
    Slice Namefr-canonical
    Control0..1
    Pattern Valuehttps://hl7.fr/ig/fhir/core/StructureDefinition/fr-core-schedule
    8. Schedule.extension
    SlicingThis element introduces a set of slices on Schedule.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 10. Schedule.extension:serviceTypeDuration
      Slice NameserviceTypeDuration
      Control0..*
      TypeExtension(FR Core Service Type Duration Extension) (Complex Extension)
      12. Schedule.extension:availabilityTime
      Slice NameavailabilityTime
      Control0..*
      TypeExtension(FR Core Schedule availability time Extension) (Complex Extension)
      14. Schedule.serviceCategory
      Control0..1
      16. Schedule.serviceType
      Control0..0
      18. Schedule.specialty
      BindingThe codes SHALL be taken from FR Core ValueSet Practitioner specialty
      (required to https://hl7.fr/ig/fhir/core/ValueSet/fr-core-vs-practitioner-specialty)
      20. Schedule.actor
      TypeReference(Device, PractitionerRole, FR Core Related Person Profile, FR Core Healthcare Service Profile, FR Core Location Profile, FR Core Patient Profile, FR Core Practitioner Profile)

      Guidance on how to interpret the contents of this table can be found here

      0. Schedule
      Definition

      A container for slots of time that may be available for booking appointments.

      ShortA container for slots of time that may be available for booking appointments
      Control0..*
      Is Modifierfalse
      Summaryfalse
      Alternate NamesAvailability
      Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
      dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
      dom-6: A resource should have narrative for robust management (text.`div`.exists())
      2. Schedule.implicitRules
      Definition

      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

      ShortA set of rules under which this content was created
      Comments

      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

      Control0..1
      Typeuri
      Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      4. Schedule.extension
      Definition

      An Extension


      May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortExtensionAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on Schedule.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 6. Schedule.extension:serviceTypeDuration
        Slice NameserviceTypeDuration
        Definition

        This French extension allows to associate the type of service with the duration of this service | Cette extension française permet d'associer le type de service avec la durée de ce service.

        ShortFR Core Service Type Duration Extension
        Control0..*
        This element is affected by the following invariants: ele-1
        TypeExtension(FR Core Service Type Duration Extension) (Complex Extension)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        8. Schedule.extension:availabilityTime
        Slice NameavailabilityTime
        Definition

        This extension specifies a list of periods of time (recurrent or not). It specifies the type of Schedule (busy-unavailable|free), the identifier of the period, the period with a possibly recurrence rule, the date of creation of the period and the priority of this period | Cette extension permet de préciser une liste de période de temps (récurrentes ou non). Elle spécifie le type de Schedule (busy-unavailable|free), l'identifiant de la période, la période (récurrente ou non avec une règle de récurrence dans le cas d'une période récurrente, la date de création de la période et une priorité.

        ShortFR Core Schedule availability time Extension
        Control0..*
        This element is affected by the following invariants: ele-1
        TypeExtension(FR Core Schedule availability time Extension) (Complex Extension)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        10. Schedule.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
        Summaryfalse
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        12. Schedule.active
        Definition

        Whether this schedule record is in active use or should not be used (such as was entered in error).

        ShortWhether this schedule is in active use
        Comments

        This element is labeled as a modifier because it may be used to mark that the resource was created in error.

        Control0..1
        Typeboolean
        Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        14. Schedule.serviceCategory
        Definition

        A broad categorization of the service that is to be performed during this appointment.

        ShortHigh-level category
        Control0..1*
        BindingFor example codes, see ServiceCategoryhttp://hl7.org/fhir/ValueSet/service-category
        (example to http://hl7.org/fhir/ValueSet/service-category)
        TypeCodeableConcept
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        16. Schedule.serviceType
        Definition

        The specific service that is to be performed during this appointment.

        ShortSpecific service
        Control0..0*
        BindingFor example codes, see ServiceTypehttp://hl7.org/fhir/ValueSet/service-type
        (example to http://hl7.org/fhir/ValueSet/service-type)
        TypeCodeableConcept
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        18. Schedule.specialty
        Definition

        The specialty of a practitioner that would be required to perform the service requested in this appointment.

        ShortType of specialty needed
        Control0..*
        BindingThe codes SHALL be taken from The codes SHOULD be taken from FR Core ValueSet Practitioner specialtyhttp://hl7.org/fhir/ValueSet/c80-practice-codes
        (required to https://hl7.fr/ig/fhir/core/ValueSet/fr-core-vs-practitioner-specialty)
        TypeCodeableConcept
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        20. Schedule.actor
        Definition

        Slots that reference this schedule resource provide the availability details to these referenced resource(s).

        ShortResource(s) that availability information is being provided for
        Comments

        The capacity to support multiple referenced resource types should be used in cases where the specific resources themselves cannot be scheduled without the other, and thus only make sense to the system exposing them as a group. Common examples of this are where the combination of a practitioner and a room (Location) are always required by a system.

        Control1..*
        TypeReference(Device, PractitionerRole, FR Core Related Person Profile, FR Core Healthcare Service Profile, FR Core Location Profile, FR Core Patient Profile, FR Core Practitioner Profile, Patient, Practitioner, RelatedPerson, HealthcareService, Location)
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

        Guidance on how to interpret the contents of this table can be found here

        0. Schedule
        Definition

        A container for slots of time that may be available for booking appointments.

        ShortA container for slots of time that may be available for booking appointments
        Control0..*
        Is Modifierfalse
        Summaryfalse
        Alternate NamesAvailability
        Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
        dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
        dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
        dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
        dom-6: A resource should have narrative for robust management (text.`div`.exists())
        2. Schedule.id
        Definition

        The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

        ShortLogical id of this artifact
        Comments

        The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

        Control0..1
        Typeid
        Is Modifierfalse
        Summarytrue
        4. Schedule.meta
        Definition

        The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

        ShortMetadata about the resource
        Control0..1
        TypeMeta
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        6. Schedule.meta.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        8. Schedule.meta.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on Schedule.meta.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 10. Schedule.meta.versionId
          Definition

          The version specific identifier, as it appears in the version portion of the URL. This value changes when the resource is created, updated, or deleted.

          ShortVersion specific identifier
          Comments

          The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes.

          Control0..1
          Typeid
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          12. Schedule.meta.lastUpdated
          Definition

          When the resource last changed - e.g. when the version changed.

          ShortWhen the resource version last changed
          Comments

          This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a read interaction.

          Control0..1
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          14. Schedule.meta.source
          Definition

          A uri that identifies the source system of the resource. This provides a minimal amount of Provenance information that can be used to track or differentiate the source of information in the resource. The source may identify another FHIR server, document, message, database, etc.

          ShortIdentifies where the resource comes from
          Comments

          In the provenance resource, this corresponds to Provenance.entity.what[x]. The exact use of the source (and the implied Provenance.entity.role) is left to implementer discretion. Only one nominated source is allowed; for additional provenance details, a full Provenance resource should be used.

          This element can be used to indicate where the current master source of a resource that has a canonical URL if the resource is no longer hosted at the canonical URL.

          Control0..1
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          16. Schedule.meta.profile
          Definition

          A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url.

          ShortProfiles this resource claims to conform to
          Comments

          It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set.

          Control0..*
          Typecanonical(StructureDefinition)
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          SlicingThis element introduces a set of slices on Schedule.meta.profile. The slices are unordered and Open, and can be differentiated using the following discriminators:
          • value @ $this
          • 18. Schedule.meta.profile:fr-canonical
            Slice Namefr-canonical
            Definition

            A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url.

            ShortProfiles this resource claims to conform to
            Comments

            It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set.

            Control0..1
            Typecanonical(StructureDefinition)
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Pattern Valuehttps://hl7.fr/ig/fhir/core/StructureDefinition/fr-core-schedule
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            20. Schedule.meta.security
            Definition

            Security labels applied to this resource. These tags connect specific resources to the overall security policy and infrastructure.

            ShortSecurity Labels applied to this resource
            Comments

            The security labels can be updated without changing the stated version of the resource. The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored.

            Control0..*
            BindingUnless not suitable, these codes SHALL be taken from All Security Labels
            (extensible to http://hl7.org/fhir/ValueSet/security-labels)

            Security Labels from the Healthcare Privacy and Security Classification System.

            TypeCoding
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            22. Schedule.meta.tag
            Definition

            Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource.

            ShortTags applied to this resource
            Comments

            The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.

            Control0..*
            BindingFor example codes, see CommonTags
            (example to http://hl7.org/fhir/ValueSet/common-tags)

            Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones".

            TypeCoding
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            24. Schedule.implicitRules
            Definition

            A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

            ShortA set of rules under which this content was created
            Comments

            Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

            Control0..1
            Typeuri
            Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            26. Schedule.language
            Definition

            The base language in which the resource is written.

            ShortLanguage of the resource content
            Comments

            Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

            Control0..1
            BindingThe codes SHOULD be taken from CommonLanguages
            (preferred to http://hl7.org/fhir/ValueSet/languages)

            A human language.

            Additional BindingsPurpose
            AllLanguagesMax Binding
            Typecode
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            28. Schedule.text
            Definition

            A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

            ShortText summary of the resource, for human interpretation
            Comments

            Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

            Control0..1
            TypeNarrative
            Is Modifierfalse
            Summaryfalse
            Alternate Namesnarrative, html, xhtml, display
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            30. Schedule.contained
            Definition

            These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

            ShortContained, inline Resources
            Comments

            This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

            Control0..*
            TypeResource
            Is Modifierfalse
            Summaryfalse
            Alternate Namesinline resources, anonymous resources, contained resources
            32. Schedule.extension
            Definition

            An Extension

            ShortExtension
            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingThis element introduces a set of slices on Schedule.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 34. Schedule.extension:serviceTypeDuration
              Slice NameserviceTypeDuration
              Definition

              This French extension allows to associate the type of service with the duration of this service | Cette extension française permet d'associer le type de service avec la durée de ce service.

              ShortFR Core Service Type Duration Extension
              Control0..*
              This element is affected by the following invariants: ele-1
              TypeExtension(FR Core Service Type Duration Extension) (Complex Extension)
              Is Modifierfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              36. Schedule.extension:availabilityTime
              Slice NameavailabilityTime
              Definition

              This extension specifies a list of periods of time (recurrent or not). It specifies the type of Schedule (busy-unavailable|free), the identifier of the period, the period with a possibly recurrence rule, the date of creation of the period and the priority of this period | Cette extension permet de préciser une liste de période de temps (récurrentes ou non). Elle spécifie le type de Schedule (busy-unavailable|free), l'identifiant de la période, la période (récurrente ou non avec une règle de récurrence dans le cas d'une période récurrente, la date de création de la période et une priorité.

              ShortFR Core Schedule availability time Extension
              Control0..*
              This element is affected by the following invariants: ele-1
              TypeExtension(FR Core Schedule availability time Extension) (Complex Extension)
              Is Modifierfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              38. Schedule.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
              Summaryfalse
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              40. Schedule.identifier
              Definition

              External Ids for this item.

              ShortExternal Ids for this item
              NoteThis is a business identifier, not a resource identifier (see discussion)
              Control0..*
              TypeIdentifier
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              42. Schedule.active
              Definition

              Whether this schedule record is in active use or should not be used (such as was entered in error).

              ShortWhether this schedule is in active use
              Comments

              This element is labeled as a modifier because it may be used to mark that the resource was created in error.

              Control0..1
              Typeboolean
              Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              44. Schedule.serviceCategory
              Definition

              A broad categorization of the service that is to be performed during this appointment.

              ShortHigh-level category
              Control0..1
              BindingFor example codes, see ServiceCategory
              (example to http://hl7.org/fhir/ValueSet/service-category)
              TypeCodeableConcept
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              46. Schedule.serviceType
              Definition

              The specific service that is to be performed during this appointment.

              ShortSpecific service
              Control0..0
              BindingFor example codes, see ServiceType
              (example to http://hl7.org/fhir/ValueSet/service-type)
              TypeCodeableConcept
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              48. Schedule.specialty
              Definition

              The specialty of a practitioner that would be required to perform the service requested in this appointment.

              ShortType of specialty needed
              Control0..*
              BindingThe codes SHALL be taken from FR Core ValueSet Practitioner specialty
              (required to https://hl7.fr/ig/fhir/core/ValueSet/fr-core-vs-practitioner-specialty)
              TypeCodeableConcept
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              50. Schedule.actor
              Definition

              Slots that reference this schedule resource provide the availability details to these referenced resource(s).

              ShortResource(s) that availability information is being provided for
              Comments

              The capacity to support multiple referenced resource types should be used in cases where the specific resources themselves cannot be scheduled without the other, and thus only make sense to the system exposing them as a group. Common examples of this are where the combination of a practitioner and a room (Location) are always required by a system.

              Control1..*
              TypeReference(Device, PractitionerRole, FR Core Related Person Profile, FR Core Healthcare Service Profile, FR Core Location Profile, FR Core Patient Profile, FR Core Practitioner Profile)
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              52. Schedule.planningHorizon
              Definition

              The period of time that the slots that reference this Schedule resource cover (even if none exist). These cover the amount of time that an organization's planning horizon; the interval for which they are currently accepting appointments. This does not define a "template" for planning outside these dates.

              ShortPeriod of time covered by schedule
              Control0..1
              TypePeriod
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              54. Schedule.comment
              Definition

              Comments on the availability to describe any extended information. Such as custom constraints on the slots that may be associated.

              ShortComments on availability
              Control0..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))